Ben Kaufman via sr-users <[email protected]> writes: >> US numbers are fixed lenght 11 digits? > > The USA is in the North American Numbering Plan (NANP). This includes USA, > Canada, much of the > Caribbean (Cuba, Jamaica, Barbados for example), some US territories in the > Pacific (Guam, > American Samoa). The NANP's "Country Code" is 1. In the USA and Canada (I > think the entirety > of the NANP) this is followed with a 3 digit area code (National > Destination Number) followed > by a 7 digit subscriber number.
Agreed of course on NANP vs US. I would say that "NANP numbers" are 10 digits, period. However E.164 representations of those are 11 as they include the 'country code'. Beware that in the US you must use a 1 before long distance (and now most numbers), but this is a trunk access code and NOT a country code. It just happens to be the same digit. This point is important as on local phone lines people do not input E.164 numbers directly. They may enter 1+10digits as long distance. Sometimes 1+7, but that is rarer now than it used to be. (Part of that is with portability, it's now more of a flat 10-digit space; it used to be hierarchical.) They may enter an international access code, 011 traditionally, + on cellular and then E.164 number. SIP trunks can be set up multiple ways. Including wanting bare E.164 with no +, always country code followed by in-country number. >> What is the usual representation of a 'local' US number? > There is no consistent answer. Consider that the oldest phone network is > in the USA, and the > unplanned initial growth and many historic regional governing bodies it > varies massively. It > has also changed greatly over time. GENERALLY speaking people will use the > 11 digit number or > the 10 digit number (without the "1" country code), but there's not a lot > of rhyme or reason > as to which is preferred in one case vs another. I think the 10-digit representation is highly normal. There is also the 7 digit number, and I think in many places if you are very local and the numbers are all in the area code where they belong then you can dial just 7, but this is only for old-school landlines. Because of overlay area codes and portability, a 7-digit representation is asking for trouble. So it is odd, and arguably not a good idea, to publish/distribute other than 10. I am unaware of other than 10 or 7 as more than rarely for conventions. I do see the local 10-digit number written as +1 617 555 1212 which is not really a 'local' number but a global representation. The + is a clue that an E.164 number follows, and the 1 is a country code. To dial it, you realize that you are in the NANP, remove the +1 as telling you to dial international access code and country code, and then add back a DIFFERENT ONE to be the LD access code. __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to [email protected] Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe:
