Hi,
> Am 04.02.2026 um 12:20 schrieb Andreas Heil via sr-users
> <[email protected]>:
>
>>
>> But are you sure you're not calling uac_replace_... twice per packet
>> processing? And for test - can you explicitly call msg_apply_changes() after
>> uac_replace_...() and check?
>
> I commented out every other use of uac_replace_to and even uac_replace_from.
>
>
I removed the uac_replace_…. from config completely.
And replaced the one in the branch_route with:
remove_hf("To“);
append_hf("To: <sip:[email protected];user=phone>\r\n“);
Now I get the following:
... snip ...
Privacy: none
P-Asserted-Identity: <sip:[email protected];user=phone>
<sip:[email protected]:5060>From:
<sip:[email protected]:5060>;tag=94113SIPpTag001
Call-ID: [email protected]
CSeq: 2 INVITE
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REGISTER, SUBSCRIBE, NOTIFY, REFER,
INFO, MESSAGE, UPDATE
Content-Type: application/sdp
Supported: replaces, timer
User-Agent: XXXX
Content-Length: 252
X-CID: XXXXX
To: <sip:[email protected];user=phone>
... snip ...
Tried the same with 5.8.4:
... snip ...
Privacy: none
P-Asserted-Identity: <sip:[email protected];user=phone>
From: <sip:[email protected]:5060>;tag=94113SIPpTag001
Call-ID: [email protected]
CSeq: 2 INVITE
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REGISTER, SUBSCRIBE, NOTIFY, REFER,
INFO, MESSAGE, UPDATE
Content-Type: application/sdp
Supported: replaces, timer
User-Agent: XXXX
Content-Length: 252
X-CID: XXXXX
To: <sip:[email protected];user=phone>
... snip …
Don’t know where the leading space in the line with the From-header comes from.
I think our best option is to simply filter in front of kamailio (add the
brackets on the ACME).
Greetings,
Andreas
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions --
[email protected]
To unsubscribe send an email to [email protected]
Important: keep the mailing list in the recipients, do not reply only to the
sender!
