Hello,
On 8/2/10 12:36 PM, Pratik Shrestha wrote:
Dear Daniel,
Now the new issue. Seems now openser is trying to talk with radius
server. But still I am getting the one error in syslog which is as
follows.
rc_send_server: no reply from RADIUS server
128-185-38-162.totisp.net:1812 <http://128-185-38-162.totisp.net:1812>
Actually I have written only 128.185.38.162 in auth_server in
radiusclient.conf. I don't know how this totisp.net
<http://totisp.net> is added. I haven't mentioned it anywhere.
probably reverse dns is done in the library, it is not relevant anyhow.
Can you start radius server in debug mode and see if it got some
request? You can also do a ngrep/wireshark on port 1812 of your radius
server to watch for network packets coming from kamailio.
Cheers,
Daniel
Please help me.
Thanks.
Regards,
Pratik
On Mon, Aug 2, 2010 at 11:44 AM, Pratik Shrestha <pratik...@gmail.com
<mailto:pratik...@gmail.com>> wrote:
Dear Daniel,
Before I work for the new version, I am first trying to configure
old version of openser and radius. I am using openser version
1.0.1 and radius client version 0.5.1 and I am following the
tutorial given in http://kamailio.net/docs/openser-radius-1.0.x.html.
My freeradius server is in another machine and when I use
radclient to check the user I made, I get the "Authenticated" message.
But when I use X-lite and connect to openser, it seems openser is
not talking with freeradius servers. I am sure the "secret" I am
using is right as I have already tested from radclient. The log
which I am getting in openser is as shown below
9(1986) SIP Request:
9(1986) method: <REGISTER>
9(1986) uri: <sip:192.168.0.56>
9(1986) version: <SIP/2.0>
9(1986) parse_headers: flags=2
9(1986) Found param type 232, <branch> =
<z9hG4bK-d8754z-c33212005635f16c-1---d8754z->; state=6
9(1986) Found param type 235, <rport> = <n/a>; state=17
9(1986) end of header reached, state=5
9(1986) parse_headers: Via found, flags=2
9(1986) parse_headers: this is the first via
9(1986) After parse_msg...
9(1986) preparing to run routing scripts...
9(1986) parse_headers: flags=100
9(1986) DEBUG:maxfwd:is_maxfwd_present: value = 70
9(1986) parse_headers: flags=10
9(1986) DEBUG:parse_to:end of header reached, state=9
9(1986) DEBUG: get_hdr_field: <To> [44];
uri=[sip:101%40kamailio.org <http://40kamailio.org>@192.168.0.56
<http://192.168.0.56>]
9(1986) DEBUG: to body ["101"<sip:101%40kamailio.org
<http://40kamailio.org>@192.168.0.56 <http://192.168.0.56>>
]
9(1986) DEBUG: add_param: tag=cc6e4259
9(1986) DEBUG:parse_to:end of header reached, state=29
9(1986) radius_is_user_in(): Failure
9(1986) parse_headers: flags=200
9(1986) get_hdr_field: cseq <CSeq>: <2> <REGISTER>
9(1986) DEBUG: get_hdr_body : content_length=0
9(1986) found end of header
9(1986) find_first_route: No Route headers found
9(1986) loose_route: There is no Route HF
9(1986) grep_sock_info - checking if host==us: 12==9 &&
[192.168.0.56] == [127.0.0.1]
9(1986) grep_sock_info - checking if port 5060 matches port 5060
9(1986) grep_sock_info - checking if host==us: 12==12 &&
[192.168.0.56] == [192.168.0.56]
9(1986) grep_sock_info - checking if port 5060 matches port 5060
9(1986) grep_sock_info - checking if host==us: 12==9 &&
[192.168.0.56] == [127.0.0.1]
9(1986) grep_sock_info - checking if port 5060 matches port 5060
9(1986) grep_sock_info - checking if host==us: 12==12 &&
[192.168.0.56] == [192.168.0.56]
9(1986) grep_sock_info - checking if port 5060 matches port 5060
9(1986) check_nonce(): comparing
[4c5649b2d78b205e6a5ca1c6dcdc54b84445dd9c] and
[4c5649b2d78b205e6a5ca1c6dcdc54b84445dd9c]
9(1986) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed
9(1986) build_auth_hf(): 'WWW-Authenticate: Digest
realm="192.168.0.56", nonce="4c5649b2d78b205e6a5ca1c6dcdc54b84445dd9c"
'
9(1986) parse_headers: flags=ffffffffffffffff
9(1986) check_via_address(192.168.0.148, 192.168.182.3, 0)
9(1986) DEBUG:destroy_avp_list: destroying list (nil)
9(1986) receive_msg: cleaning up
At freeradius also, no request goes from openser.
Please advise me how to get rid of this problem.
Best Regards,
Pratik
On Wed, Jul 28, 2010 at 5:56 PM, Pratik Shrestha
<pratik...@gmail.com <mailto:pratik...@gmail.com>> wrote:
Thanks a lot. I will give it a try
Pratik
On Wed, Jul 28, 2010 at 3:48 PM, Daniel-Constantin Mierla
<mico...@gmail.com <mailto:mico...@gmail.com>> wrote:
Hello,
On 7/22/10 6:06 AM, Pratik Shrestha wrote:
Dear All,
I am very new to OpenSer. I want to use latest version
of OpenSer with Radius. I need the
documentation/tutorial on how to do this. Googling,
Ionly found for the old version. Please help me.
indeed, there is a rather old version:
http://www.kamailio.org/docs/openser-radius-1.0.x.html
What I can say now is that you can skip the part of
installing kamailio and use next link instead:
http://www.kamailio.org/dokuwiki/doku.php/install:kamailio-3.0.x-from-git
Radius client library is now in most of common Linux
distributions, so you can install it with the package
manager (you need the devel headers as well, the -dev
package).
FreeRadius configuration should be more or less the same.
The config of kamailio has changed quite a lot. Use the
default one from kamailio, follow the WITH_AUTH define
conditions and replace auth_db with auth_radius modules
and functions. Also, the rest of radius modules were
merged into misc_radius. For enabling radius acc, you need
to recompile acc module after editing the Makefile in
module directory.
Hope it helps to start, ask here if you get stuck.
Cheers,
Daniel
--
Daniel-Constantin Mierla
http://www.asipto.com/
--
Daniel-Constantin Mierla
http://www.asipto.com/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
