thanks Carsten for your information. So I'm not the first one who wishes
this functionality :-) I'm looking forward to using this function in the
new release.
Does this mean that in Kamailio 3.0.4 no possibility is given for
automatically changing the state of a destination from 'nearly-probing' to
'active'? Could the state being changed manually only?
regards
Klaus
P.S. I think we have to speed up implementation of SIP OPTIONS support in
the gateway - this would reset the state from probing to active.....
> Hi Klaus,
>
> I used to use that function especially for the purpose of resetting the
> failure-counter.
> We are using the "ds_set_state("r")" ("r" as "reset counter") in a
> "onreply"-route; i will check, why i never commited that patch to the
> Kamailio-Repository.
> I will add this functionality to git-Trunk in the next few days;
> however, since it is a new feature, i will not backport it (but i can
> provide patches for 3.1).
>
> Kind regards,
> Carsten
>
>
>
> 2011/2/24 Klaus Feichtinger <klaus.li...@inode.at>:
>> Hello list,
>>
>> I have a question to the dispatcher module in Kamailio version 3.0.4.
>>
>> In my integration I use this module for distributing calls to a set of
>> gateways (with the round robin algorithm). Sometimes a gateway does
>> not react or send back a negative response. In that case I use the
>> function 'ds_mark_dst("p")' in the failure_route and mark the current
>> destination with the flag 'probing'. I have set the threshhold value
>> for probing mode to '10'. This means that a gateway is effectively set
>> to probing mode only when it was marked with the flag 'probing' for 10
>> times. However, sometimes a gateway is sending back a negative
>> response for e.g. 5 times and is afterwards working fine - without any
>> problems. A few hours later (e.g.) it is sending a negative reply
>> again for one time. This means: the counter for the probing_flags is
>> increasing every time when the function ds_mark_dst("p") is executed
>> (in case that the process was not restarted in the meantime!). So the
>> problem is, that the counter is reaching the threshhold value at any
>> time and at that moment the gateway is set to probing mode. Even if
>> the gateway has sent a negative reply for only one time (at that
>> moment) - but according the history the proging_flag was set several
>> times.
>>
>> What I miss in this module is a function to _reset_ that flag counter
>> from a REPLY_ROUTE. Note: I have to reset the counter, because the
>> gateway does not yet SIP OPTIONS requests and therefore it is set to
>> 'probing' all time until it is manually set back to active via MI
>> command or after a process restart. According the README file (and
>> practical experience) the function ds_mark_dst() is executable only
>> within the failure_route. However, when I want to set the flag ("a")
>> for the current destination I will do it within a reply_route, but not
>> in the failure_route (because I have received a positive response and
>> not a negative one). From my point of view it does not make sense
>> setting the 'active' flag for a destination from within a FAILURE
>> route.
>>
>> Does anybody have an idea, how the 'flag-counter' could be reset (from
>> within the script)? I do not want to use a MI command.....
>>
>> configuration excerpt:
>>
>> [...]
>> modparam("dispatcher", "db_url",
>> "mysql://openser:openserrw@localhost/openser")
>> modparam("dispatcher", "table_name", "dispatcher")
>> modparam("dispatcher", "dst_avp", "$avp(AVP_DST)")
>> modparam("dispatcher", "grp_avp", "$avp(AVP_GRP)")
>> modparam("dispatcher", "cnt_avp", "$avp(AVP_CNT)")
>> modparam("dispatcher", "ds_ping_from", "sip:proxy@192.168.37.87")
>> modparam("dispatcher", "ds_probing_mode", 0)
>> modparam("dispatcher", "ds_probing_threshhold", 10)
>> modparam("dispatcher", "ds_ping_interval", 30)
>> modparam("dispatcher", "flags", 2)
>> modparam("dispatcher", "force_dst", 1)
>> [...]
>> if (!ds_select_dst("1", "4")) {
>> sl_send_reply("404", "No destination (disp)");
>> exit;
>> }
>> t_on_failure("failureroute");
>> t_on_reply("replyroute");
>> [...]
>> failure_route[failureroute] {
>> [...]
>> if (t_check_status("[45][08]0") || (t_branch_timeout() &&
>> !t_branch_replied())) {
>> ds_mark_dst("p");
>> if (!ds_next_dst()) {
>> t_reply("404", "No destination (disp)");
>> exit;
>> }
>> t_on_failure("failureroute");
>> t_on_reply("replyroute");
>> }
>>
>> [...]
>> }
>> onreply_route [replyroute] {
>> if (t_check_status("180|200") {
>> # nice to have......
>> # ds_mark_dst("a");
>> }
>> }
>>
>> Thanks in advance!
>>
>> regards,
>> Klaus
>>
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>> list sr-users@lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>
>
>
> --
> Carsten Bock
> Schomburgstr. 80
> 22767 Hamburg
> Germany
>
> Mobile +49 179 2021244
> Home +49 40 34927217
> Büro (Verl) +49 5246 801427
> Fax +49 40 34927218
> mailto:cars...@bock.info
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
