Thanks for the tip! I am already using SEMS for digest auth handling in invite flows, so I suppose it would not be too big of a stretch. But I'd still like to find a Kamailio-based way for this specific task if possible, partly because I believe uacreg would be more useful if it were more flexible.
I am, as I always have been, very appreciative of your efforts with SEMS and use it extensively for various applications. -- This message was painstakingly thumbed out on my mobile, so apologies for brevity, errors, and general sloppiness. Alex Balashov - Principal Evariste Systems LLC 260 Peachtree Street NW Suite 2200 Atlanta, GA 30303 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com/ On Nov 7, 2011, at 4:45 AM, Stefan Sayer <[email protected]> wrote: > Hi, > > sorry for semi-offtopic > o Alex Balashov on 11/07/2011 02:55 AM: >> One compromise I considered is to use SEMS' SBC module to front the >> registrations via its auth component, but SEMS presently only supports > you can have sems register, and manage (add, remove etc) registrations via > e.g. xmlrpc with the db_reg_agent module > >> doing this for INVITE flows, not REGISTERs or anything else. > you can also set the contact in the registration when using db_reg_agent (btw > afair also when using registrar_client). > > Stefan > >> >> If you have any other suggestions, I am eager to hear them. >> >> Thanks! >> >> -- Alex >> > > > -- > tel:+491621366449 > sip:[email protected] > mailto/xmpp:[email protected] _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list [email protected] http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
