Hi,
I have already posted this message but it was sent only to Sammy Govind
somehow, not to the mailing list. So I am posting it again to the list. I am
sorry if this is double posting or if this is not the right way to do it.
**Original message***
Hi Sammy
These are the params from my kamilio cfg file. Just a reminder, the whole cfg
file is copied from the link:
http://kb.asipto.com/kamailio:kamailio-mixed-ipv4-ipv6, i just edited the IP
addresses and DB_URL line to fit my settings.
#!ifdef WITH_NAT
# ----- rtpproxy params -----
# modparam("rtpproxy", "rtpproxy_sock", "udp:localhost:7722")
modparam("rtpproxy", "rtpproxy_sock", "unix:/var/run/rtpproxy/rtpproxy.sock")
# ----- nathelper params -----
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from", "sip:pin...@kamailio.org")
# params needed for NAT traversal in other modules
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB)
#!endif
I have tried to use both unix and UDP sockets each at a time.I removed the
square braces from the IP addresses in the rtpproxy default files and its no
more complainig about the "rtpproxy: setbindhost: No address associated with
hostname" but still have the same messages in the logs.
Thank you four your help.
Regards,
Maedot
________________________________
From: Sammy Govind <govoi...@gmail.com>
To: nunu abe <nunu_...@yahoo.com>; SIP Router - Kamailio (OpenSER) and SIP
Express Router (SER) - Users Mailing List <sr-users@lists.sip-router.org>
Sent: Thursday, January 5, 2012 8:13 PM
Subject: Re: [SR-Users] RTPproxy on Kamailio 3.2.1 difficulty.
hi,
quick look at your logs,
14(1596) ERROR: rtpproxy [rtpproxy.c:1466]: can't connect to RTP proxy
15(1597) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (10): nathelper
14(1596) ERROR: rtpproxy [rtpproxy.c:1538]: proxy
<unix:/var/run/rtpproxy/rtpproxy.sock> does not respond, disable it 5(1584)
DEBUG: db_mysql [km_my_con.c:123]: server version is 5.1.41-3ubuntu12.10
14(1596) WARNING: rtpproxy [rtpproxy.c:1395]: can't get version of the RTP proxy
14(1596) WARNING: rtpproxy [rtpproxy.c:1432]: support for RTP proxy
<unix:/var/run/rtpproxy/rtpproxy.sock> has been disabled temporarily
14(1596) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (9): debugger
5(1584) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (5): nathelper
14(1596) DEBUG: debugger [debugger_mod.c:124]: rank is (9) 5(1584) DEBUG:
<core> [sr_module.c:892]: DEBUG: init_mod_child (5): rtpproxy 5(1584) ERROR:
rtpproxy [rtpproxy.c:1466]: can't connect to RTP proxy 5(1584) ERROR: rtpproxy
[rtpproxy.c:1538]: proxy <unix:/var/run/rtpproxy/rtpproxy.sock> does not
respond, disable it 5(1584) WARNING: rtpproxy [rtpproxy.c:1395]: can't get
version of the RTP proxy 5(1584) WARNING: rtpproxy [rtpproxy.c:1432]: support
for RTP proxy <unix:/var/run/rtpproxy/rtpproxy.sock> has been disabled
temporarily 5(1584) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (5):
debugger 5(1584) DEBUG: debugger [debugger_mod.c:124]: rank is (5)
15(1597) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (10): rtpproxy
15(1597) ERROR: rtpproxy [rtpproxy.c:1466]: can't connect to RTP proxy
15(1597) ERROR: rtpproxy [rtpproxy.c:1538]: proxy
<unix:/var/run/rtpproxy/rtpproxy.sock> does not respond, disable it
15(1597) WARNING: rtpproxy [rtpproxy.c:1395]: can't get version of the RTP proxy
15(1597) WARNING: rtpproxy [rtpproxy.c:1432]: support for RTP proxy
<unix:/var/run/rtpproxy/rtpproxy.sock> has been disabled temporarily
15(1597) DEBUG: <core> [sr_module.c:892]: DEBUG: init_mod_child (10): debugger
paste the rtpproxy/nathelper module params lines which are in your kamailio.cfg.
regards,
sammy
On Wed, Jan 4, 2012 at 7:59 PM, nunu abe <nunu_...@yahoo.com> wrote:
Thank you Sammy for noticing :)
>
>Now I have a bit of different but same problem. After the earlier posting the
>message I decided to start everything from scratch and I installed everything
>new.
>But I still have problem. The rtpproxy server is not working, it fails to
>replace the IP address of the sender in the SDP and hence there is no RTP
>communication.
>These are the steps I followed:
>
>
>1. Freshly installed kamailio 3.2.1 on Kubuntu from GIT
>
>2. Installed mysql server
>
>4. installed rtpproxy, changed its user to be kamailio.
>
>3.Copied the provided kamailio.cfg file from the link and edited the IP
>addresses and the DBURL to reflect my settings
>
>4. Uncommented
the Control socket line and added these lines in the /etc/default/rtpproxy file
> CONTROL_SOCK="unix:/var/run/rtpproxy/rtpproxy.sock"
> ADDR_IPV4=[10.10.10.10]
> ADDR_IPV6=[3001:0:0:1::10]
> EXTRA_OPTS="-l {ADDR_IPV4} -6 /{ADDR_IPV6}"
>
>*** I aslso tried without adding the last three lines, but it made no
>difference.***
>
>5. Started rtpproxy in a bridge mode
>
>xxxx@DualStackCS:~$ sudo rtpproxy -F -l 10.10.10.10 -6 /3001:0:0:1::10
>*** I have also tried to start it this way :xxxx@DualStackCS:~$ sudo rtpproxy
>-F -l 10.10.10.10 -6 /3001:0:0:1::10 -s unix:/var/run/rtpproxy/rtpproxy.sock
>- but no difference****
>
>xxxx@DualStackCS:~$ ps aux|grep rtpproxy
>root 1522 0.0 0.0 11384 696 ? Ssl 15:31 0:00 rtpproxy -F
>-l 10.10.10.10 -6
3001:0:0:1::10
>xxxx 1528 0.0 0.0 3324 804 pts/1 S+ 15:31 0:00 grep
>--color=auto rtpproxy
>
>xxxxx@DualStackCS:~$ sudo /etc/init.d/kamailio start
>
>
>6. Started kamailio
>@DualStackCS:~$ sudo /etc/init.d/kamailio restart
>
>I have attached the log file.
>
>Many thanks for your help.
>
>Regards,
>
>Maedot
>
>
>
>________________________________
> From: Sammy Govind <govoi...@gmail.com>
>To: mico...@gmail.com; SIP Router - Kamailio (OpenSER) and SIP Express Router
>(SER) - Users Mailing List <sr-users@lists.sip-router.org>
>Sent: Tuesday, January 3, 2012 2:04 PM
>Subject: Re: [SR-Users] RTPproxy on Kamailio 3.2.1 difficulty.
>
>
>
>Hi,
>
>
>I had a good laugh when I read the reply, but going through the whole thread
>again I found this:
>" It displays the same message even when I replace ADDR_IPV4 and ADDR_IPV6
>with IP addresses. "
>
>
>So there _IS_ some problem here.
>
>
>Nuno, can you please copy paste the exact command which you executing, plus
>paste the logs,
>
>
>--
>Regards,
>Sammy.
>
>
>On Tue, Jan 3, 2012 at 2:22 PM, Daniel-Constantin Mierla <mico...@gmail.com>
>wrote:
>
>Hello,
>>
>>the ADDR_IPV4 and ADDR_IPV6 have to be replaced with real IP
addresses that you have on the system runnin RTPProxy.
>>
>>Cheers,
>>Daniel
>>
>>
>>On 1/3/12 8:56 AM, nunu abe wrote:
>>Dear Daniel,
>>>Greetings and Happy New year to you all! I would like to thank you very much
>>>for your detailed and well structured tutorials on Kamailio. I am resending
>>>this email as I sent the earlier one before I was a member of the mailing
>>>list and I thought it may have been sent to the spam folder. If not then, I
>>>apologize for double posting.
>>>I was trying to design a similar scenario like the one " Run your own SIP
>>>VoIP service on both IPv4 and IPv6 " as explained on Asipto
>>>web-page(http://kb.asipto.com/kamailio:kamailio-mixed-ipv4-ipv6). However I
>>>ran into difficulties with rtpproxy. The proxy is not routing media packets
>>>as it should. I followed the instruction regarding the kamailio.cfg file and
>>>edited the necessary lines according to my settings. I think my problem
>>>comes from setting up the rtpproxy.
>>>1. I edited the /etc/default/rtpproxy file. i.e. I uncommented the line -
>>>CONTROL_SOCK="unix:/var/run/rtpproxy/rtpproxy.sock"
>>>2. I started the rtpproxy with this command: rtpproxy -F -l ADDR_IPV4 -6
>>>/ADDR_IPV6 . However, after this command the system returns the message :
>>>rtpproxy: setbindhost: No address associated with hostname
>>>It displays the same message even when I replace ADDR_IPV4 and ADDR_IPV6
>>>with IP addresses.
>>>
>>>3. I have also tried using the udp socket:-
>>>CONTROL_SOCK=udp:127.0.0.1:22222, of course I have replaced the unix socket
>>>by this udp socket in the kamilio.cfg file.
>>>So my question is, what did I do wrong with the settings that SIP messages
>>>are traversing normal from IPv4 client to IPv6 client and vice versa but
>>>media files(RTP packets) are not? The rtpproxy receives the media files from
>>>one client but fails to forward them to the other client.
>>>Thanks for your help.
>>>Maedot
>>>
>>>
>>>_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
>>_______________________________________________
>>SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>sr-users@lists.sip-router.org
>>http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>
>_______________________________________________
>SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>sr-users@lists.sip-router.org
>http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
>_______________________________________________
>SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>sr-users@lists.sip-router.org
>http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
