While I didnt restarted my syslog (as the config were there from before) -
but I did check after restarting syslog
regarding using xlog - I have 3 xlog messages in my route logic around
Registration
# handle registrations
xlog("L_WARN","Code before Registrar");
route(REGISTRAR);
xlog("L_WARN","Code after Registrar");
I also have a log message at the start of the route
xlog("L_WARN","Begin Routing");
regarding the hyphen I checked removing the hyphen but based on my
understanding from the link regarding enabling logging the hyphen enables
asynchronous logging
Anyhow even after all these I still dont see any logs.
Regards,
Faisal
On Tue, May 29, 2012 at 3:33 PM, Charles Chance <
charles.cha...@sipcentric.com> wrote:
> **
> Hi Faisal,
>
> You say you added to syslog.conf: local1.* -/var/log/kamailio
>
> Is that exactly how it appears? If so, I think you need to remove the
> hyphen so it becomes: local1.* /var/log/kamailio
>
> As Sammy said, don't forget to restart syslog.
>
> Regards,
>
> Charles
>
>
>
> -----Original Message-----
> *From*: SamyGo <govoi...@gmail.com <samygo%20%3cgovoi...@gmail.com%3e>>
> *Reply-To*: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER)
> - Users Mailing List
> <sr-users@lists.sip-router.org<sip%20router%20-%20%22kamailio%20%28openser%29%20and%20sip%20express%20router%20%28ser%29%20-%20users%20mailing%20list%22%20%3csr-us...@lists.sip-router.org%3e>
> >
> *To*: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
> Users Mailing List
> <sr-users@lists.sip-router.org<sip%20router%20-%20%22kamailio%20%28openser%29%20and%20sip%20express%20router%20%28ser%29%20-%20users%20mailing%20list%22%20%3csr-us...@lists.sip-router.org%3e>
> >
> *Subject*: Re: [SR-Users] Using Sip-Router Logging & Register Problem
> Problem
> *Date*: Tue, 29 May 2012 15:27:06 +0500
>
> Did you restart your syslog ? Add xlog lines in yur config when you
> receive a REGISTER request so that it actually prints something out.
>
> On Tue, May 29, 2012 at 3:23 PM, Faisal Yousuf <faisal.you...@gmail.com>
> wrote:
>
> Hi Daniel/ Sammy ,
>
> I made the changes in config as suggested (i.e. move the define variables
> at the top of the file rather then in the middle)
>
> Regarding setting debug=3 => I am setting WITH_DEBUG in the config file
> so based on processing of this symbol I believe debug=4 is set.#
>
>
>
> For the log facility in the kamailio.cfg I have set the
> option log_facility=LOG_LOCAL1
>
>
>
> & in my syslog.cfg (attached again) I have set the following
>
> local1.* -/var/log/kamailio
>
>
>
> but still I dont see any logs in this location when I start kamailio
>
>
>
> I can see the kamailio process - (in total there are 19 processes here
> is the root process all other are child processes of this process)
>
> kamailio 3375 1 0 08:06 ? 00:00:00 /usr/local/sbin/kamailio
> -P /var/run/kamailio.pid -m 32 -M 4 -u kamailio -g kamailio
>
>
>
> I can also see kamailio starting to listen on port 5060 port on the
> local machine on both UDP & TCP interfaces
>
>
>
> I am using an xlite phone on windows to attempt to register - on my
> Kamailio VM (using UDP) I started a tcpdump to see if I am receiving the
> Register messages - I can see the register packets coming to the Kamailio
> hosts from the phone - but I dont see any responses from Kamailio.
>
>
>
> Also as there are no logs I dont know what is going wrong.
>
> Regards,
>
> Faisal
>
>
>
>
>
>
>
> On Tue, May 29, 2012 at 2:37 PM, SamyGo <govoi...@gmail.com> wrote:
>
> Hi Faisal,
>
>
>
> You say you've seen packets on kamailio but kamailio isn't replying !!
>
>
>
> 1- Please verify that yuor kamailio is indeed started *[ps -ef | grep
> kamailio]*
>
> 2- Verify if kamailio is actuallay listening on the same port as you
> are sending pcakets to ! *[netstat -pln|grep kamailio]*
>
> 3- Verify if your kamailio is using the same protocol as of your client
> i.e TCP or UDP or TLS etc.
>
> 4- instead of viewing the file* /var/log/kamailio* see*/var/log/messages
> *because you haven't mentioned local7 as Log facility in your config.
>
> I don't see your syslog*.conf * file in this mail! check that file and
> follow the referenced
> link<http://www.kamailio.org/dokuwiki/doku.php/utils:basic-syslog-configuration>
> completely.
>
>
>
>
> Also see your configurations kamailio.cfg file and use define tags from
> second line from top onward i.e just after #!KAMAILIO.
>
> Try getting rid of the comment line "*####### Defined Values #########*"
> - in my experience such comment before define cause trouble with
> configurations.
>
>
>
>
>
> See all these and then reply with updates.
>
>
>
> Regards,
>
> Sammy G.
>
>
> On Tue, May 29, 2012 at 2:18 PM, Daniel-Constantin Mierla <
> mico...@gmail.com> wrote:
>
> Hello,
>
> you can set debug=3 in kamailio config to see very verbose debug messages.
> If you don't get any, means the request does not reach the application
> layer, meaning you have a firewall in place that drops the packets from the
> network.
>
> Cheers,
> Daniel
>
>
>
> On 5/29/12 8:02 AM, Faisal Yousuf wrote:
>
> Hi Experts,
>
> I am a newbee with SIP-Router/Kamailio - I installed Kamailio on a
> CentOS 5.5 VM - following the instructions from the following link
>
>
>
> http://kb.asipto.com/kamailio:install:3.0.x-from-git-centos5x
>
>
>
> Kamailio is installed & I can start kamailio deamon from service
> kamailio start
>
>
>
> However I also created two subscribers - but when I try to register
> my SIP Phone (by setting Kamailio as the domain to register to) - I can see
> my sip-phone sending the Register request to Kamailio (I put a tcpdump on
> the kamailio machine to see sip-messages reaching the host) but I dont get
> any response from Kamailio - so my sip phone reaches the 408 Registeration
> Timeout state.
>
>
>
> Now, I dont get any logs from Kamailio to know what is happening
> while my phone is sending the register request - I tried to configure
> logging following instructions from the following link
>
>
>
>
> http://www.kamailio.org/dokuwiki/doku.php/utils:basic-syslog-configuration
>
>
>
> But I dont get any logs in the /var/log/kamailio log file.
>
>
>
> To assist in understanding the issue - I am attaching the syslog
> config , kamailio config file & the kamailio service script in the init.d
> folder.
>
>
>
> My first objective will be to enable logging for kamailio & the next
> objective is to get the basic registration & routing between endpoints - my
> ultimate objective is to configure SER/Kamailio as a load-balancer for our
> B2BUA & Media Servers (I found the dispatcher module can help in
> accomplishing this) - Can anybody help me in identifying why I am not
> getting any logs ?
>
> I have already seen the wiki & have developed some understanding
> regarding how Kamailio is configured but am I seeking more information
> regarding the route language - (the state-model + reference of the
> functions that can be used in the route script etc.) - in this regards if I
> can get any documentation pointers from the user community that can help me
> gain a better understanding the use of Kamailio for above it will be great
>
>
>
> Regards,
>
> Faisal
>
>
>
> Regards,
>
> Faisal
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> -- Daniel-Constantin Mierla -
> http://www.asipto.comhttp://twitter.com/#!/miconda -
> http://www.linkedin.com/in/micondaKamailio Advanced Training, Seattle, USA,
> Sep 23-26, 2012 - http://asipto.com/u/katu
>
>
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
