modparam("tm", "failure_reply_mode", 3)
modparam("tm", "contacts_avp", "tm_contacts");
modparam("tm", "contact_flows_avp", "tm_contact_flows");
modparam("tm", "failure_reply_mode", 3)
modparam("tm", "restart_fr_on_each_reply", 0)
Kelvin Chua
On Thu, Dec 19, 2013 at 3:57 PM, Daniel-Constantin Mierla <mico...@gmail.com
> wrote:
> Can you share here the parameters you set for tm module?
>
> Daniel
>
>
> On 19/12/13 01:55, Kelvin Chua wrote:
>
> Also noticed $ru pegged at the first branch's ruri upon entering
> failure_route for succeeding branches. Is this also an expected behaviour?
> Should it not contain the ruri of the previous failed branch?
> On Dec 18, 2013 4:19 PM, "Daniel-Constantin Mierla" <mico...@gmail.com>
> wrote:
>
>> Hello,
>>
>> I will look over it -- I wanted to know exactly the situation.
>>
>> Cheers,
>> Daniel
>>
>> On 17/12/13 15:54, Kelvin Chua wrote:
>>
>> Yes, a local timeout. The call was sent to a bogus IP. i still feel this
>> behaviour is wrong. $rd in acc should contain the failed gateway's ip and
>> not the previous one.
>> On Dec 17, 2013 4:43 PM, "Daniel-Constantin Mierla" <mico...@gmail.com>
>> wrote:
>>
>>> It is a local timeout, not a 408 received from callee, right?
>>>
>>> Daniel
>>>
>>> On 17/12/13 05:16, Kelvin Chua wrote:
>>>
>>> it's for a 408 timeout logged into missed_calls
>>>
>>> Kelvin Chua
>>>
>>>
>>> On Mon, Dec 16, 2013 at 8:52 PM, Daniel-Constantin Mierla <
>>> mico...@gmail.com> wrote:
>>>
>>>> Hello,
>>>>
>>>> is it for a 200ok reply or >=300?
>>>>
>>>> In the code, the r-uri from the branch that is used for relaying the
>>>> reply should be used.
>>>>
>>>> Cheers,
>>>> Daniel
>>>>
>>>>
>>>> On 14/12/13 12:15, Kelvin Chua wrote:
>>>>
>>>> this is the 2nd branch, the first branch is sent to 100.200.30.40
>>>> $rd is set properly according to xlog (10.20.30.40). tcpdump proves
>>>> packets are sent to 10.20.30.40
>>>> however, after failing, ACC logs dst_domain as the previous branch's
>>>> $rd (100.200.30.40), not the current one.
>>>> is this the expected behavior? seems incorrect.
>>>>
>>>> modparam("acc",
>>>> "db_extra","src_user=$fU;src_domain=$fd;src_ip=$si;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd;callrate=$avp(callrate)")
>>>>
>>>> failure_route[SERIAL] {
>>>> if (is_method("INVITE|SUBSCRIBE")) {
>>>> t_on_branch("MANAGE_BRANCH");
>>>> t_on_reply("MANAGE_REPLY");
>>>> }
>>>> if ( isbflagset(FLB_CANCEL) ) {
>>>> xlog("cancel bflag set!\n");
>>>> exit;
>>>> } else if ( !t_next_contacts() ) {
>>>> xlog("serial fork done!\n");
>>>> t_reply("404", "Not here or busy");
>>>> exit;
>>>> } else {
>>>> setflag(FLT_ACC);
>>>> setflag(FLT_ACCMISSED);
>>>> xlog("failure_route new branch - $ru\n");
>>>> t_on_failure("SERIAL");
>>>> $avp(callrate) = "";
>>>> if ( $sel(ruri.params["rtmr"]) != $null ) {
>>>>
>>>> t_set_fr($sel(ruri.params["rtmr"])*1000,$sel(ruri.params["dtmr"])*1000);
>>>> $avp(ABSOLUTE) = $sel(ruri.params["tmr"]);
>>>> }
>>>> if ( $sel(ruri.params["callrate"]) != $null )
>>>> $avp(callrate) = $sel(ruri.params["callrate"]);
>>>> xlog("failure_route sending INVITE to $rd\n");
>>>> t_relay();
>>>> }
>>>> }
>>>>
>>>> ERROR: <script>: failure_route sending INVITE to 10.20.30.40
>>>> DEBUG: <script>: new branch [1] to
>>>> sip:14X88X72X2X@10.20.30.40:5060;dtmr=1;rtmr=20;tmr=60;callrate=0.007600000000
>>>> DEBUG: siputils [checks.c:103]: has_totag(): no totag
>>>> DEBUG: rtpproxy [rtpproxy_funcs.c:148]: check_content_type(): type
>>>> <application/sdp> found valid
>>>> DEBUG: <core> [parser/sdp/sdp_helpr_funcs.c:565]: extract_mediaip():
>>>> located IP address [192.168.5.191] in `o=' field
>>>> DEBUG: <core> [parser/sdp/sdp_helpr_funcs.c:565]: extract_mediaip():
>>>> located IP address [192.168.5.191] in `c=' field
>>>> DEBUG: rtpproxy [rtpproxy.c:2630]: force_rtp_proxy(): proxy reply:
>>>> 10370 2X8.1X1.3X.2X#012
>>>> DEBUG: siputils [checks.c:103]: has_totag(): no totag
>>>> DEBUG: <core> [msg_translator.c:461]: clen_builder(): clen_builder:
>>>> content-length: 172 (172)
>>>> DEBUG: <core> [msg_translator.c:206]: check_via_address():
>>>> check_via_address(1X5.2X2.1X7.1X0, 192.168.5.191, 0)
>>>> DEBUG: <core> [parser/sdp/sdp.c:793]: free_sdp(): _sdp = 0x7f53c9a5e580
>>>> DEBUG: <core> [parser/sdp/sdp.c:795]: free_sdp(): sdp = 0x7f53cb87d3e0
>>>> DEBUG: <core> [parser/sdp/sdp.c:797]: free_sdp(): session =
>>>> 0x7f53cb87d480
>>>> DEBUG: tm [t_reply.c:1710]: relay_reply(): DEBUG: relay_reply:
>>>> branch=0, save=0, relay=-1
>>>> DEBUG: tm [t_reply.c:1211]: t_should_relay_response(): ->>>>>>>>>
>>>> T_code=100, new_code=408
>>>> DEBUG: tm [t_hooks.c:288]: run_trans_callbacks_internal(): DBG:
>>>> trans=0x7f53c1511148, callback type 128, id 0 entered
>>>> DEBUG: acc [acc_logic.c:539]: tmcb_func(): acc callback called for
>>>> t(0x7f53c1511148) event type 128, reply code 408
>>>> NOTICE: acc [acc.c:279]: acc_log_request(): ACC: call missed:
>>>> timestamp=1387019197;method=INVITE;from_tag=wyudf;to_tag=;call_id=cjfbdfydrjielti@X340saucy;code=408;reason=RequestTimeout;src_user=kelvin;src_domain=2X8.1X1.3X.2X;src_ip=1X5.2X2.1X7.1X0;dst_ouser=14X88X72X2X;dst_user=14X88X72X2X;dst_domain=100.200.30.40;callrate=0.007600000000
>>>>
>>>>
>>>> Kelvin Chua
>>>>
>>>>
>>>> _______________________________________________
>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>>>> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>>
>>>> --
>>>> Daniel-Constantin Mierla -
>>>> http://www.asipto.comhttp://twitter.com/#!/miconda -
>>>> http://www.linkedin.com/in/miconda
>>>>
>>>>
>>>> _______________________________________________
>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>> sr-users@lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>>
>>>
>>> --
>>> Daniel-Constantin Mierla -
>>> http://www.asipto.comhttp://twitter.com/#!/miconda -
>>> http://www.linkedin.com/in/miconda
>>>
>>>
>> --
>> Daniel-Constantin Mierla -
>> http://www.asipto.comhttp://twitter.com/#!/miconda -
>> http://www.linkedin.com/in/miconda
>>
>>
> --
> Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda
> - http://www.linkedin.com/in/miconda
>
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
