Here, there are 2 interfaces but only the VIP should be used. Also, the INVITE exits the same interface it entered (i.e. the VIP) but exits with a different source port (because of the TCP connection).
I tried disabling double RR, I only see the VIP record route now, however I still see the top Via with the non-VIP interface although the INVITE is forwarded to the proxy using the VIP interface. From: sr-users [mailto:sr-users-boun...@lists.sip-router.org] On Behalf Of Alex Balashov Sent: Tuesday, May 05, 2015 3:31 PM To: Mickael Marrache; sr-users@lists.sip-router.org Subject: Re: [SR-Users] Double record routes That is normal behaviour if double RR is enabled in the RR module; two Record-Routes will be added if Kamailio is multihomed and the invite exits a different interface to the one it entered. -- Alex Balashov | Principal | Evariste Systems LLC 303 Perimeter Center North, Suite 300 Atlanta, GA 30346 United States Tel: +1-800-250-5920 (toll-free) / +1-678-954-0671 (direct) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/ Sent from my BlackBerry. From: Mickael Marrache Sent: Tuesday, May 5, 2015 08:27 To: sr-users@lists.sip-router.org Reply To: Kamailio (SER) - Users Mailing List Subject: [SR-Users] Double record routes Hi, We are adding TCP support to our load balancer and for some reason it adds two record route headers. The instance have two IP addresses on which it binds: one if the VIP address and the second is the non-VIP address. I explicitly set the tcp_source_ipv4 parameter with the VIP address so that it is used as source address for outbound TCP connection. So, we get the following INVITE going from the load balancer to a proxy: T 2015/05/05 12:08:49.715822 VIP:54667 -> PROXY:5060 [AP] INVITE sip:1...@mycompany.com SIP/2.0. Record-Route: <sip:NONVIP;transport=tcp;r2=on;lr>. Record-Route: <sip:VIP;transport=tcp;r2=on;lr>. Via: SIP/2.0/TCP NONVIP;branch=z9hG4bK6f4.688efa90a17e02181ef7a11fecf8bb72.0;i=3. Via: SIP/2.0/TCP 1.1.1.1:4598;received=2.2.2.2;branch=z9hG4bKmqFaCxNo6m3f5LW4;rport=40020. You can see the INVITE is sent from the VIP address (as specified using the tcp_source_ipv4 parameter). However, the added Via corresponds to the non-VIP address. Also, you can see the two record route headers added for both addresses. Any idea? Thanks, Mickael
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
