have you seen your usrloc actually populate data from another server?
i can verify my dmq is working properly. just usrloc not populating.
Kelvin Chua
On Fri, Aug 7, 2015 at 6:22 PM, Asgaroth <00asgarot...@gmail.com> wrote:
> Hi,
>
>
>
> I’m a new user to the dmq subsystem in kamailio, but, once I had a
> properly configured dmq environment and loaded dmq_usrloc after dmq, all I
> had to do was add the following to the module paramters:
>
>
>
> modparam("dmq_usrloc", "enable", 1)
>
>
>
> Then in the routing logic of the registrar’s you just need to add the
> appropriate dmq message handling blocks.
>
>
>
> Hope this helps in some way.
>
>
>
>
>
>
>
> *From:* sr-users [mailto:sr-users-boun...@lists.sip-router.org] *On
> Behalf Of *Kelvin Chua
> *Sent:* Thursday 6 August 2015 07:29
> *To:* SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
> Users Mailing List <sr-users@lists.sip-router.org>
> *Subject:* [SR-Users] dmq_usrloc
>
>
>
> is there any function to trigger replication?
>
>
>
> i enabled the module and dmq is working for my htables
>
> but usrloc is not replicating.
>
>
>
> "kamctl ul show" does not show anything
>
>
>
> i used ngrep to trace the KDMQ packets, i can see the frequent exchanges
> but nothing related to usrloc. am i doing something wrong?
>
>
> Kelvin Chua
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
