Hello,
I will adjust the tutorial to make the note about PUBLISH looping back
and need to authorize it by IP check.
Regarding "db_mode", are you referring to "subs_db_mode" parameter?
Cheers,
Daniel
On 11/09/15 09:17, huseyin kalyoncu wrote:
> Hi
>
> After some struggling i solved the problem. It turns out that Kamailio
> was sending 407 for PUBLISH messages
> which sent to itself by itself :) and because of that it was not
> relaying PUBLISH messages. It is a very strange behaviour and hard to
> recognize
> without a proper debug output.
>
> I fixed the problem with adding following check to the AUTH route block:
>
> if (is_method("PUBLISH") && src_ip=="MY_IP_ADDRESS") {
> return;
> }
>
> After adding this, BLF is working normally with the conf given in the
> tutorial which was i mentioned in my previous message.
>
> Btw. there is another problem whith BLF when i change db_mode of
> presence module from 2 to 3. It gives strange duplicate key errors
> about presentity table and the light remains red constantly after
> hangup the call.
> I will try to send those db error messages to this thread later when i
> have time.
>
> Thanks
> Huseyin
>
> On Fri, Sep 11, 2015 at 10:04 AM, Daniel-Constantin Mierla
> <mico...@gmail.com <mailto:mico...@gmail.com>> wrote:
>
> Hello,
>
> have you captured the traffic on loopback network interface? Try
> also to run with debug=3 in kamailio.cfg.
>
> Cheers,
> Daniel
>
>
> On 10/09/15 22:44, huseyin kalyoncu wrote:
>> Hi
>>
>> I am trying to implement BLF functionality as described
>> in http://kb.asipto.com/kamailio:presence:k43-blf.
>>
>> I am using the same conf with the one in the tutorial except that
>> i am using postgres database instead of mysql.
>>
>> The problem is BLF is not working with this config (presence
>> server and proxy server are in the same kamailio with same IP).
>> But when I separate presence server from proxy server (2
>> different kamilio boxes with different IPs) BLF working perfect.
>> i can see PUBLISH & NOTIFY messages in the tcpdump output with
>> the working configuration.
>> But i can not see any PUBLISH messages in the tcpdump output with
>> the original config (one with presence and proxy servers are same).
>>
>> My question
>> in the normal working environment (when BLF working perfectly);
>> should i see PUBLISH and NOTIFY messages in the tcpdump output
>> when the presence and proxy servers are the same?
>>
>> thanks
>>
>> Huseyin
>>
>>
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierla
> http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -
> http://www.linkedin.com/in/miconda
> Book: SIP Routing With Kamailio - http://www.asipto.com
> Kamailio Advanced Training, Sep 28-30, 2015, in Berlin -
> http://asipto.com/u/kat
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
> list
> sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com
Kamailio Advanced Training, Sep 28-30, 2015, in Berlin - http://asipto.com/u/kat
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
