Hi Safdar,

Il 05/11/15 06:17, Safdar Khan ha scritto:
Hi Daniel,
Your suggestion helped me a lot.Thanks.
But now i am running both rtp proxy and kamailio on same computer(i.e. localhost) and according to syslog there is no error. Further will you tell me how can i test that they are working together or not, like in wireshark or any other method to trace out their signals.
i bet you'll find a lot useful to use a tool like sngrep (https://github.com/irontec/sngrep) to grab and inspect realtime sip traces. Moreover, you should try to increase the verbosity level of rtpproxy (if run as a daemon) or run it in foreground mode: check rtpproxy man page.

Bruno
How should i proceed furher now?

On Wed, Nov 4, 2015 at 7:27 PM, Daniel-Constantin Mierla <mico...@gmail.com <mailto:mico...@gmail.com>> wrote:

    Hello,

    you need to configure rtpproxy to listen on udp:192.168.5.97:7722
    <http://192.168.5.97:7722> for control commands, not on
    127.0.0.1:7722 <http://127.0.0.1:7722>. The 127.0.0.1 network
    interface is available on inside same system, not from a remote
    system.

    Cheers,
    Daniel


    On 04/11/15 13:41, Safdar Khan wrote:
    Hi friends,
    Its been two days and still finding a way to install rtp proxy
    and integrate it with kamailio.
    I have checked running status of rtp proxy by *netstat* command
    in this way...

        *_#netstat -pln | grep rttpproxy_*


    and i got the output like that(i assume its working):

        *_udp  0  0 127.0.0.1:7722 <http://127.0.0.1:7722>  0.0.0.0.*:_*


    Well here is my setup of kamailio and rtp proxy...
    1.I am using two computers one for running kamailio and another
    one for rtp proxy.
    2.Both are running seperately.
    3.Two android mobile phones to test the service(App using imsdroid).

    I am little bit confused with ip settings in kamailio
    configuration file in the part where *rtpproxy_sock*
    is given.For now i have given the *ip:port of *the computer on
    which rtp proxy is running separately.
    And i am getting the error message in *syslog* like this

        *can't send command to a RTP proxy*

    *
    *

        *proxy <udp:192.168.5.97:7722 <http://192.168.5.97:7722>>
        does not respond, disable it*


        *can't get version of the RTP proxy*

    Actually i want to record the calls.
    Any kind of help to configure kamailio with rtp proxy is appreciated.


    _______________________________________________
    SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
    sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
    http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- Daniel-Constantin Mierla
    http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda>  
-http://www.linkedin.com/in/miconda
    Book: SIP Routing With Kamailio -http://www.asipto.com
    Kamailio Advanced Training, Nov 30-Dec 2, Berlin -http://asipto.com/kat


    _______________________________________________
    SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
    list
    sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
    http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Reply via email to