Hi Franz, Thanks a lot for your support.
Traces decoded with diameter and could able to see the messages correctly. Yes, I am interested to capture traces using sip-scenario generator tool. Can you please provide that tool. Somewhere I have read in Kamailio forum that, Call setup has successful happened using "Boghe IMS client" and " Mercuro-Silver". Currently We are trying to automate the basic call scenario using Boghe IMS client, It would be better if you can provide "Mercuro-Silver", So that call can be established between two different IMS Client. Tried finding in google for "Mercuro-Silver" but couldn't get it. Thanks in advance!! Regards, Sainath -----Original Message----- From: Franz Edler [mailto:franz.ed...@technikum-wien.at] Sent: Friday, February 12, 2016 10:51 PM To: Sainath Ellendula (NEP) <sainath.ellend...@wipro.com> Cc: basits...@hotmail.com; sr-users@lists.sip-router.org Subject: RE: Re:[SR-Users] Kamailio IMS deployment Hi Sainath, > It's working fine with given zone-files. > Now, I could able to setup a call between two users, Please find > attachment of tcpdump. Thats fine and congratulation. > Small clarification, I have started capturing of tcpdump before > starting of other components including hss. But I don't see any > diameter messages in Wireshark traces(tcpdump). That is caused by the fact that the 3 involved diameter nodes (HSS, I-CSCF and S-CSCF) use 3 different ports for Diameter (3868, 3869 and 3870). Only port 3868 is the assigned port number to Diameter, the other two port numbers (3869 and 3870) are not. The reason for this is a historic one. The OpenIMSCore platform used one common IP-address for all tree nodes and therefore different port-numbers had to be used. Wireshark has limited possibilities to automatically detect the protocol behind a stream when port numbers deviating from the assigned ones are used.You have to tell that to Wireshark. Just take the two packets (#10 and #17) and in your tracefile trace_12_2_2016_12.pcap and tell Wireshark "decode as Diameter" and you will see what you might have expected. In your case, where you now succeeded to split the platform with different IP-addresses this constraint has gone. There is no reason to not use the same "assigned" port number 3868 for all three nodes. This could be the next challenge for you to reconfigure. I have also added a message diagram produced with sip-scenario generator which helps a lot in debugging. Just extract both html files and open the one with the shorter filename (trace_12_2_2016_12_index.html). The sip-scenario generator is an open-source-tool but unfortunately with no support anymore. But it is really helpful. If you are interested I can provide the tool. BR Franz The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
