Hi Prashant,
If I were to do it the lazy way and if I have understood your requirement
completely. I might've ended up using snmp monitoring of the CPU and set a
memcache/redis variable to be 0 or 1 in case CPU goes above or below 70.
In my kamailio.cfg I would just check that redis variable and decide
whether to drop requests or continue with the config.

Isn't that something that can help you ?

Thanks,
Sammy
On Mar 1, 2016 09:00, "Prashant Desai" <pdesa...@gmail.com> wrote:

>
> Hi Kamailio,
>
>                 We are using Kamailio V4.2.3 for our project and we are
> trying to address the performance requirement. We have following queries
>
> and need some inputs from Kamailio.
>
>
>
> *Requirement :* CPU Utilization Limit to 70%, If the limit is crossed
> Kamailio has to reject the Request.
>
> And If it is within the limit Kamailio has to Process the Requests. (i.e.
> Kamailio has to dynamically set and reset the policy based on CPU Load).
>
>
>
> *Our Findings* : We have come across ratelimit module in Kamailio, we
> tried using the same to address the requirement
>
> but we see it is not  dynamically setting and resetting the policy (once
> if it starts rejecting then every time it rejects it, only if we restart
> the kamailo it works)
>
>
>
> *What we Need*: We need to know
>
> 1.       Are we using the right module to address the above requirement ?
>
> 2.       We are only using ratelimit, module, do we have to include any
> other module along with ratelimit?
>
> 3.       We are using FEEDBACK algorithm, is that OK ?
>
> 4.       Setting  “ modparam("ratelimit", "pipe", "3:FEEDBACK:70") “ , is
> this correct ?
>
> 5.       In ratelimit.c , function
>
>  static int pipe_push(struct sip_msg * msg, int id) {
>
>               *case* *PIPE_ALGO_FEEDBACK*:
>
>                      *LM_DBG(**"drop_rate
> [%d],hash[*pipes[id].counter][%d]\n"**,*drop_rate, hash[*pipes[id].*
> *counter**])*;
>
>                      ret = (hash[*pipes[id].counter % 100] < *drop_rate)
> ? -1 : 1;
>
> }
>
>                 We are not able to understand the above line (
> hash[*pipes[id].counter % 100]). Could you please elaborate.
>
>
>
> 6.       Where are we lagging ?
>
>
>
>
>
> Regards,
>
> Prashanth
>
>
>
> ------------------------------
>
> ============================================================================================================================
> Disclaimer: This message and the information contained herein is
> proprietary and confidential and subject to the Tech Mahindra policy
> statement, you may review the policy at
> http://www.techmahindra.com/Disclaimer.html externally
> http://tim.techmahindra.com/tim/disclaimer.html internally within
> TechMahindra.
>
> ============================================================================================================================
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Reply via email to