Hi Mihail, you could also see the REGISTER in the PCAP, if you did not configure your DNS/BIND properly...
Thanks, Carsten P.S.: I regularly test Zoiper with our own setup, it works... and it even should work with the 4.4 version, you're running. 2016-05-30 17:25 GMT+03:00 Mihail Dakov <mihail.da...@ng4t.com>: > > > On 05/30/2016 04:11 PM, Carsten Bock wrote: >> Hi, >> >> the Zone-File is the interesting part, not the Bind-Config. >> >> Did you configure the outbound Proxy on Zoiper properly? > Yes, otherwise the REGISTER from the UE would be missing from the pcap, > right? >> >> You can actually see in the trace, that the Proxy-CSCF is forwarding >> the packet to itself (looping) and at some point it drops the request. >> > I see that as well. I eliminated big part of the log as is the loop > itself. After some time it gets stable. But to estimate the nature of > the loop I get about 1M log lines with debug level 5 for 1 register > procedure triggered from the UE. > > I guess i'll check with the trunk code meanwhile. >> Thanks, >> Carsten >> >> 2016-05-30 16:53 GMT+03:00 Mihail Dakov <mihail.da...@ng4t.com>: >>> Hi, >>> >>> DNS error? This is interesting. Well I got a local bind running with a >>> dnszone provided from ims aio from kamailio.org site. You can have a >>> look at the bind config which copied adjusting port numbers. >>> I would say that it does work: >>> >>> user@host:etc/kamailio$ host hss >>> hss.open-ims.test has address 192.168.177.100 >>> user@host:/etc/kamailio$ host icscf >>> icscf.open-ims.test has address 192.168.177.100 >>> user@host:/etc/kamailio$ host pcscf >>> pcscf.open-ims.test has address 192.168.177.100 >>> user@host:/etc/kamailio$ host scscf >>> scscf.open-ims.test has address 192.168.177.100 >>> >>> >>> >>> >>> On 05/30/2016 03:40 PM, Carsten Bock wrote: >>>> Hi, >>>> >>>> looks to me, like a typical DNS error. How did you configure DNS? >>>> You have BIND up and running and a proper Zone-File? Do the CSCF's >>>> properly query the DNS? >>>> >>>> Thanks, >>>> Carsten >>>> >>>> 2016-05-30 16:35 GMT+03:00 Mihail Dakov <mihail.da...@ng4t.com>: >>>>> Hi Folks, >>>>> >>>>> I have the strangest problem just after installing latest stable >>>>> version. I had tried both ways using the repo >>>>> (http://deb.kamailio.org/kamailio44) and downloading code with local >>>>> compile (https://www.kamailio.org/w/2016/05/kamailio-v4-4-1-released/) >>>>> >>>>> The initial scenario is to get M2M with commercial IP and subsequently >>>>> use the Rx interface to do the same. We are blocked because we cannot >>>>> even achieve clean register for the UEs. >>>>> >>>>> UE1(galaxy s4 zoiper) -------- Kamailio IMS aio >>>>> | >>>>> UE2(galaxy s4 zoiper) -------- | >>>>> >>>>> >>>>> What happens is that the first register message triggers some >>>>> quasi-endless loop in the PCSCF. Hence it cannot be forwarded to SCSCF, >>>>> ICSCF and HSS. But this doesn't always happen and between all the parse >>>>> problems there are some register messages which get passed to the scscf >>>>> icscf and hss. Somehow the parser feeds itself from the previous parse >>>>> run and thus loops quite intensively. The message I get is SIP/2.0 400 >>>>> CSeq method does not match request method. >>>>> I must say that reiterating the registration process sometimes i get the >>>>> register and sometimes i don't. >>>>> >>>>> Has anyone encounter similar issue for similar use case and can share >>>>> some thoughs about a fix? >>>>> >>>>> I attached relevant log file, pcaps and configuration files. Let me know >>>>> if more config files are needed. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>>>> sr-users@lists.sip-router.org >>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>>> >>>> >>>> >>>> >>> >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>> sr-users@lists.sip-router.org >>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>> >> >> >> > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > -- Carsten Bock CEO (Geschäftsführer) ng-voice GmbH Millerntorplatz 1 20359 Hamburg / Germany http://www.ng-voice.com mailto:cars...@ng-voice.com Office +49 40 5247593-40 Fax +49 40 5247593-99 Sitz der Gesellschaft: Hamburg Registergericht: Amtsgericht Hamburg, HRB 120189 Geschäftsführer: Carsten Bock Ust-ID: DE279344284 Hier finden Sie unsere handelsrechtlichen Pflichtangaben: http://www.ng-voice.com/imprint/ _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
