Hi Daniel, sorry for not being clear.
I have all three evapi event routes in my config. When I telnet to port 8448, xlog shows that evapi:connection-new is exectued. When I send 6:efelin, to telnet, the evapi:message-received is executed. When I close the telnet session, the evapi:connection-closed is executed. This works just fine. However, when I execute evapi_async_relay or evapi_relay nothing is sent to my telnet session or CGRateS application (This was also observed by ngrep and tcpdump). My configuration is default from CGRateS: https://github.com/cgrates/cgrates/tree/master/data/tutorials/kamevapi/kamailio/etc/kamailio (kamailio.cfg and included kamailio-cgrates.cfg) with few xlogs for further debuging + modparam("evapi", "workers", 2) modparam("evapi", "bind_addr", "0.0.0.0:8448") I have just downloaded the fresh config in order to evade some typo, but the problem persists. Thanks Jan 2016-08-22 9:35 GMT+02:00 Daniel-Constantin Mierla <mico...@gmail.com>: > > > On 22/08/16 09:31, Efelin Novak wrote: > > [...] > > When I connect to evapi using telnet, I receive NO answer: > > root@PC:~$ telnet 192.168.30.29 8448 > Trying 192.168.30.29... > Connected to 192.168.30.29. > Escape character is '^]'. > > > However it reacts on my netstring messages and executes the > event_route[evapi:message-received]. > > > To clarify -- do you have event_route[evapi:connection-new] {...} block > defined in your config and it is not executed? > > Cheers, > Daniel > > -- > Daniel-Constantin Mierlahttp://www.asipto.com - > http://www.kamailio.orghttp://twitter.com/#!/miconda - > http://www.linkedin.com/in/miconda > >
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
