We did not purposely delete the records. But we were dealing with a setup
where the db was "out-of-sync" with memory. The reason I deleted them
during our tests was to replicate the issue we had in production.
The param we enabled fixed the issue within 30minutes by inserted when an
update failed.
On Mon, Jan 16, 2017 at 9:27 AM, Daniel-Constantin Mierla <mico...@gmail.com
> wrote:
> You should not delete the record only from database via a db client There
> is a rpc command to delete it, which will take care of removing it from
> memory as well as from database (depending on the db_mode module parameter
> for usrloc).
>
> Cheers,
> Daniel
>
> On 16/01/2017 14:46, Vik Killa wrote:
>
> The record we added via RPC was first creating a new contact (and
> inserting into the db), this was working fine. But we found that if we
> cleared the database, any "updates" would fail. Adding that parameter
> caused the record to get inserted if an update failed (re-register)
>
>
> On Mon, Jan 16, 2017 at 3:28 AM, Daniel-Constantin Mierla <
> mico...@gmail.com> wrote:
>
>> The record you add via rpc is creating a new contact in memory or it's
>> updating an existing one?
>>
>> Can you dump the record after you add it over rpc and send it over to
>> mailing list to see what attributes it has?
>>
>> Cheers,
>> Daniel
>>
>> On 14/01/2017 16:25, Vik Killa wrote:
>>
>> resolution update --
>> we found that setting
>> `modparam("usrloc", "db_check_update", 1)`
>>
>> fix the issue by inserting missing rows on re-reg
>>
>> Thanks!
>>
>>
>> On Fri, Jan 13, 2017 at 9:30 AM, Vik Killa <vipki...@gmail.com> wrote:
>>
>>> Hi Daniel,
>>> RPC flush is not setting the flag, but im not sure that is where the
>>> issue is, as I stated, we are not setting any memory-only flags with save()
>>>
>>> But here is the flush function (FL_MEM not set)
>>>
>>> static void ul_rpc_flush(rpc_t* rpc, void* ctx)
>>> {
>>> synchronize_all_udomains(0, 1);
>>> return;
>>> }
>>>
>>> Any ideas?
>>> Thanks,
>>> /V
>>>
>>>
>>> On Fri, Jan 13, 2017 at 9:24 AM, Vik Killa <vipki...@gmail.com> wrote:
>>>
>>>> Hi,
>>>> We have tried using these flags:
>>>>
>>>> save("location")
>>>> save("location", "0x00")
>>>> save("location", "0x04")
>>>>
>>>> And still memory does not get flushed to DB.
>>>> I will test the RPC command.
>>>> Thanks,
>>>> /V
>>>>
>>>>
>>>> On Fri, Jan 13, 2017 at 9:12 AM, Daniel-Constantin Mierla <
>>>> mico...@gmail.com> wrote:
>>>>
>>>>> Hello,
>>>>>
>>>>> that flag is used to mark a contact for storage only in memory. The
>>>>> save() function has a parameter with flags where this kind of storage can
>>>>> be set. Can you check the RPC command is setting this flag?
>>>>> Cheers,
>>>>> Daniel
>>>>>
>>>>>
>>>>> On 13/01/2017 15:06, Vik Killa wrote:
>>>>>
>>>>> following up here
>>>>> i found if we comment out a single line of code, kamcmd ul.flush works
>>>>>
>>>>> here is the git diff
>>>>>
>>>>>
>>>>>
>>>>> diff --git a/src/modules/usrloc/ucontact.c
>>>>> b/src/modules/usrloc/ucontact.c
>>>>> index 47f3c2f..633ca81 100644
>>>>> --- a/src/modules/usrloc/ucontact.c
>>>>> +++ b/src/modules/usrloc/ucontact.c
>>>>> @@ -474,7 +474,7 @@ int db_insert_ucontact(ucontact_t* _c)
>>>>> int nr_cols;
>>>>>
>>>>> if (_c->flags & FL_MEM) {
>>>>> - return 0;
>>>>> + //return 0;
>>>>> }
>>>>> if(unlikely(_c->ruid.len<=0)) {
>>>>> LM_ERR("invalid ruid for aor: %.*s\n",
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> I don't quite understand the logic in that code.
>>>>> Does anyone have an idea of why ` if (_c->flags & FL_MEM) {`
>>>>> returns?
>>>>>
>>>>> Thanks,
>>>>> /V
>>>>>
>>>>>
>>>>> On Thu, Jan 12, 2017 at 4:34 PM, Vik Killa <vipki...@gmail.com> wrote:
>>>>>
>>>>>> Hello,
>>>>>> we've noticed that the usrloc module does not "sync" all the records
>>>>>> from memory into the database.
>>>>>> I use a bash script to generate in-memory AoRs (
>>>>>> http://paste.debian.net/plain/908521)
>>>>>> then i perform
>>>>>> kamcmd ul.flush
>>>>>> and no records are inserted.
>>>>>> We have tried various usrloc parameters but none seem to work
>>>>>> Here is our basic setup
>>>>>>
>>>>>> # ----- usrloc params -----
>>>>>> modparam("usrloc", "db_url", DBURL)
>>>>>> modparam("usrloc", "db_mode", 2)
>>>>>> modparam("usrloc", "use_domain", 1)
>>>>>> modparam("usrloc", "timer_interval", 120)
>>>>>> modparam("usrloc", "timer_procs", 4)
>>>>>>
>>>>>> We are using postgresql.
>>>>>> are we missing something?
>>>>>>
>>>>>> Thanks
>>>>>> /V
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>>>>> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>>
>>>>> --
>>>>> Daniel-Constantin Mierlawww.twitter.com/miconda --
>>>>> www.linkedin.com/in/miconda
>>>>> Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
>>>>>
>>>>> _______________________________________________ SIP Express Router
>>>>> (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>>> sr-users@lists.sip-router.org http://lists.sip-router.org/cg
>>>>> i-bin/mailman/listinfo/sr-users
>>>>
>>>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>> --
>> Daniel-Constantin Mierlawww.twitter.com/miconda --
>> www.linkedin.com/in/miconda
>> Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
>>
>> _______________________________________________ SIP Express Router (SER)
>> and Kamailio (OpenSER) - sr-users mailing list
>> sr-users@lists.sip-router.org http://lists.sip-router.org/cg
>> i-bin/mailman/listinfo/sr-users
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda
> Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
