> Development-time debugging not compiled in.
> To enable, configure with --enable-debug and recompile.
If you want more useful information, recompile the client side ssh with
--enable-debug
Did you apply the Sami Lehtinen <[EMAIL PROTECTED]> patch before you compiled the
source? What is in /.ssh2/identification? We had hostbased
authentication problems before applying this patch. I can send the patch to
you if you like or you can also check http://www.ssh.com for the patch.
Michael Hulet
Network System Administrator
ITTC, University of Kansas
On Wed, 15 Mar 2000, Paul Blair wrote:
>
> I have been trying all day to get hostbased authentication
> working on ssh2. I am running 2.0.13, so it seems like it SHOULD be working.
> I've set up the /etc/ssh2/knownhosts/machinename.ssh-dss.pub on the
> remote server. I have hostbased listed under AllowedAuthentications in
> sshd2_config. I've verified that my hostnames are resolving as I would
> expect them to and that they're listed properly in the .shosts and
> publickey files. I am trying to log into the machine as root. I have a
> /.shosts AND a /etc/shosts.equiv for good measure, but it always asks
> me for a password.
>
> Here's debug output from the server:
>
> debug: Reading private host key from /etc/ssh2/hostkey
> debug: Key comment: 1024-bit dsa hostkey
> debug: SshUnixConfig/sshunixconfig.c:270/ssh_server_load_host_key: Reading public
>host key from: /etc/ssh2/hostkey.pub
> debug: Becoming server.
> debug: Creating listener
> debug: Listener created
> debug: Running event loop
> debug: Sshd2/sshd2.c:653/new_connection_callback: Wrapping stream with
>ssh_server_wrap...
> debug: ssh_server_wrap: creating transport protocol
> debug: ssh_server_wrap: creating userauth protocol
> debug: Sshd2/sshd2.c:663/new_connection_callback: done.
> debug: new_connection_callback returning
> debug: Remote version: SSH-1.99-2.0.13 (non-commercial)
>
> ...and from the client:
>
> Development-time debugging not compiled in.
> To enable, configure with --enable-debug and recompile.
> debug: hostname is 'hookups'.
> debug: Unable to open //.ssh2/ssh2_config
> Development-time debugging not compiled in.
> To enable, configure with --enable-debug and recompile.
> debug: connecting to hookups...
> debug: entering event loop
> debug: ssh_client_wrap: creating transport protocol
> debug: ssh_client_wrap: creating userauth protocol
> debug: Remote version: SSH-1.99-2.0.13 (non-commercial)
> debug: Host key found from the database.
> debug: Unable to opeo //.ssh2/identification
> root@hookups's password:
>
> ...seemingly not terribly useful. Any help would be appreciated.
> I've checked usenet and the web for help, but haven't found anything
> much except other people asking for help with the same problem... :/
>
> Paul
>
