Hello, We have just installed ssh-1.2.30 on a CRAY J90 running Unicos 10 and the sshd does not work. When trying ssh1 on a remote IRIX machine to login to the Cray, first comes the prompt for a password, then the message of the day and after that the connection is broken with the message "Command terminated on signal 11." If the sshd on the CRAY is started in a debug mode, the messages there are: # /usr/local/sbin/sshd -d debug: sshd version 1.2.30 [ymp-cray-unicos] debug: Initializing random number generator; seed file /etc/ssh_random_seed log: Server listening on port 22. log: Generating 768 bit RSA key. Generating p: ..+ Generating q: ..++ (distance 12) Computing the keys... Testing the keys... Key generation complete. log: RSA key generation complete. log: RSA key generation complete. debug: Server will not fork when running in debugging mode. log: Connection from 130.161.28.28 port 4999 debug: Client protocol version 1.5; client software version 1.2.27 debug: Sent 768 bit public key and 1024 bit host key. debug: Encryption type: idea debug: Received session key; encryption turned on. debug: Installing crc compensation attack detector. debug: Attempting authentication for jana. log: RhostsRsa authentication not available for connections from unprivileged port. log: Password authentication for jana accepted. debug: Allocating pty. debug: Ignoring unsupported tty mode opcode 41 (0x29) debug: Ignoring unsupported tty mode opcode 60 (0x3c) debug: Ignoring unsupported tty mode opcode 61 (0x3d) debug: Ignoring unsupported tty mode opcode 62 (0x3e) debug: Received request for X11 forwarding with auth spoofing. debug: Allocated channel 0 of type 1. debug: Forking shell. debug: Entering interactive session. debug: Received SIGCHLD. debug: End of interactive session; stdin 0, stdout (read 1249, sent 1249), stderr 0 bytes. debug: pty_cleanup_proc called fatal: Local: Command terminated on signal 11. debug: Calling cleanup 0x412c(0x2ec00) debug: pty_cleanup_proc called again, ignored debug: Calling cleanup 0x19d27(0x0) debug: Calling cleanup 0x1448c(0x0) # Could somebody tell me what goes wrong? We use the default config files for server and for client. The client part works. Thanks for any information. Regards, Jana. -- Jana Vasiljev Tesar Delft University of Technology High Performance applied Computing Systems Support P.O. Box 354 Tel : 31-15-2785023 2600AJ Delft Fax : 31-15-2783787 The Netherlands Email : [EMAIL PROTECTED]
