----- Original Message ----- From: "Harley Kelsey" <[EMAIL PROTECTED]> To: "Multiple recipients of sslivesteam" <[EMAIL PROTECTED]> Sent: Tuesday, October 28, 2003 11:13 AM Subject: RE: Threading
> Royce, > > You can try milling the threads. On my Sherline, I mount a Dremel or > grinder with a cutter ground to the thread angle and turn the lathe > chuck and thread gearing by hand with a handle I made that attaches to > the head shaft. You take small cuts and reverse turn to back out. You > can cut very fine threads this way. > > Harley Kelsey > Tel 604-688-2775 Fax (same) > Cel 604-842-2442 > email [EMAIL PROTECTED] > > > >
