Steve Shyvers wrote: >Hi Royce, > > >If you fitted new wick tubes did you reuse the old wick material or pack new >material? > The wick material is asbestos give to me graciously by Clark Lord.
>Then make sure the wicks are . . . > Yes, did all that. >Is the alcohol feed sump vent tube not only the same height as before but >also the same inside diameter and no horizontal runs to catch and hold a >droplet of fuel (works great as a plug and can drive you crazy)? > > Vent tube is vertical, same size, etc. I just haven't carefully checked it's height above the rails (or more importantly, below the top of the wick tubes). I've loosened the wick packing some and am going to give it a steam. If it was the packing, I'm going to be mindful of just how sensitive wick packing is in determining flame size. Will let you know. Might have a chance to steam soon. royce _______________________________________________ SSLiveSteam mailing list Send messages: [email protected] Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam Rules: http://www.45mm.com/sslivesteam_guide.html
