All the information I have gleaned over the last few years, whether or not I 
was the originator of thread, has been FANTASTIC! Many of these I have placed 
into my personal archives. Thanks to everyone, from all coasts and Countries.

I just discovered yesterday that I will be able to attend Diamondhead! (read as 
got permission from the wife) I have transportation and lodging at the former 
Ramada arranged. It will be my first time. I'm still reeling from the fact that 
she said yes. I have no idea what to take, besides my normal two or three boxes 
of rolling stock, locos and fixin's. I know it's late, but as the shock is 
beginning to wear off, I'm beginning to get fired up. I know a bunch of you 
listers will be going, I'm just wondering who?

Dave Orwig
Virginia Beach

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeffrey Williams
Sent: Thursday, January 04, 2007 10:23 PM
To: Small-scale live steam discussions
Subject: Re: [SSLiveSteam] Threading up to a shoulder the easy way, Dave

Only a real old time super-macho done-it-all machinist would give this 
kind of advice!   No kid raised on numerical control machine tools knows 
about this stuff!  Believe it!

==========

Arthur S. Cohen (by way of Dave Cole) wrote:

>Hi Dave,
>If you can get the correct change gears to generate the thread pitch 
>you need and the internal or external thread goes right up to a 
>shoulder and you want to "do it your self" do the following:  First 
>make sure that you are opening the correct pitch by machining 
>anything cylindrical.  Just a scratch will do for checking.  Then 
>chuck the item you want to cut threads on and do it by hand.  You 
>don't have to use the lathe's motor to rotate the chuck for 
>threading.  Rotate the chuck by hand.  This way you have very precise 
>control to get up against the shoulder.  Since you are opening a very 
>small .5 mm pitch on a copper alloy you don't have to worry about 
>feeding the cutting tool in at a 59º or 60º angle.  You can just 
>plunge in at 90º and in 3 or 4 light cuts you will have what you are 
>trying to do the first time. 
>Arthur--Mexico City

_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to