Harry: Are your boilers built the same as the Mid-West? With a single center flu that lets most of the heat go up the stack? I improved one for a friend by simply drilling a bunch of holes in the bottom sheet and brazing in about 8-10 short stubs of #10 copper wire (left over from wiring my shop) Also opening out the air holes or putting the boiler up on a stand of some kind helps a lot too. When I purchased mine and saw it was put together with tin/lead solder and used a blow off the tube for a safety I gave it away and built one from some tube I had around here. All brazed, added heat from the wire stubs and a stand to allow more air to enter the bottom. Right now I have on the sketch pad a vertical multitube boiler, not for sale, but for my own amusment. John Meacham from the high deserts of Calif 12 inch Atlas lathe, mini mill, HF band saw and a rusty file.
************************************** See what's new at http://www.aol.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://postfix.45mm.com/pipermail/sslivesteam/attachments/20070930/45e8f109/attachment.html _______________________________________________ SSLiveSteam mailing list Send messages: [email protected] Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam Rules: http://www.45mm.com/sslivesteam_guide.html
