On 2/28/22 11:48 AM, mike tancsa wrote:
On 2/28/2022 2:43 PM, Navdeep Parhar wrote:
On 2/28/22 11:36 AM, mike tancsa wrote:
Hi Navdeep,
I updated a pair of releng13 boxes today as I saw there are new
drivers/firmware. However, the firmware seems to fail on both in
different ways
t5nex0: <Chelsio T540-CR> mem
0x91300000-0x9137ffff,0x90000000-0x90ffffff,0x91984000-0x91985fff irq
17 at device 0.4 on pci2
t5nex0: failed to load firmware module: 2. cfg 0, fw 0
t5nex0: firmware on card (1.25.0.40) is older than the version
bundled with this driver, but the driver cannot take corrective
action because it is unable to load the firmware module.
It looks like the firmware KLD isn't available even though you have
t5fw_cfg_load="yes" in loader.conf.
Can you try removing the cxgbe lines from loader.conf temporarily and
kldload if_cxgbe manually after boot? It should be able to find the
KLD with the firmware and update the card. Then restore the lines in
loader.conf and see if it comes up properly.
Hi,
It worked on the 4 port but not the 2 port unit
root@coldstorage1:~ # kldload if_cxgbe
t5nex0: <Chelsio T520-LL-CR> mem
0xb2300000-0xb237ffff,0xb1000000-0xb1ffffff,0xb28a0000-0xb28a1fff irq 16
at device 0.4 on pci1
t5nex0: failed to connect to the firmware: 6, 0. PCIE_FW 0x80000000
t5nex0: error during attach, adapter is now in recovery mode.
root@coldstorage1:~ #
Try a manual firmware upgrade while it's in recovery mode. The
firmwares are the sys/dev/cxgbe/firmware/*.bin files in the src tree.
# cxgbetool t5nex0 loadfw .../t5fw-1.26.6.0.bin
Then reboot the system.
Regards,
Navdeep
