On 8/4/2022 1:12 PM, mike tancsa wrote:
On 7/31/2022 11:41 PM, Jim King wrote:
I'm trying to use a Qnap dual port 2.5Gb NIC with FreeBSD 13.1.
FreeBSD recognizes the NIC and I'm able to connect to my LAN at 1Gb.
However, trying to push heavy traffic through the NIC results in a
temporary loss of connectivity: traffic stops and the message "igc0:
link state changed to DOWN" appears in the system log. About 10
seconds later the message "igc0: link state changed to UP" is logged,
followed by some messages from dhclient indicating that it has
acquired a lease. At that point network connectivity works normally,
until I try to push a lot of traffic again. I've been able to
trigger this every time using iperf3 from another PC on my LAN, and
by using Ookla's speedtest client (my Internet service is good for
about 900 Mbps).
How long does it take to wedge the nic ? I have a pair of Topton
routers (4 IGC NICs) back to back and a simple iperf3 test seems to
work ok between the 2 units.
Actually, I was able to reproduce this too running iperf3 -P4 for about
60 seconds. Watching via sysutils/ifstat, it does indeed drop traffic
when the link drops
ifstat -b
igc0 igc1 pflog0
Kbps in Kbps out Kbps in Kbps out Kbps in Kbps out
0.88 1.93 0.00 0.00 0.00 0.00
1.32 1.45 0.00 0.00 0.00 0.00
0.88 1.45 0.00 0.00 0.00 0.00
1.32 1.45 0.00 0.00 0.00 0.00
0.88 1.45 0.00 0.00 0.00 0.00
0.88 1.45 0.00 0.00 0.00 0.00
4.68 12.23 2497.66 395238.6 0.00 2.34
0.94 6.08 15036.53 2.31e+06 0.00 0.00
0.94 7.26 15076.75 2.31e+06 0.00 0.00
0.94 6.08 15014.83 2.31e+06 0.00 0.00
0.94 7.26 15054.63 2.31e+06 0.00 0.00
0.94 7.26 15022.16 2.31e+06 0.00 0.00
0.94 7.25 14928.42 2.31e+06 0.00 0.00
1.87 7.25 15000.98 2.31e+06 0.00 0.00
1.40 7.25 14960.84 2.31e+06 0.00 0.00
1.40 7.25 14919.44 2.31e+06 0.00 0.00
1.87 7.26 14789.44 2.31e+06 0.00 0.00
2.70 8.56 1168.12 178704.6 0.00 0.00
1.77 6.85 0.00 0.00 0.00 0.00
1.40 9.97 0.00 0.00 0.00 0.00
1.87 7.26 10732.92 1.83e+06 0.00 0.00
0.94 7.25 14166.38 2.32e+06 0.00 0.00
0.94 6.09 14269.06 2.31e+06 0.00 0.00
1.40 6.09 14402.47 2.31e+06 0.00 0.00
This is on 13.1-STABLE from Aug 3.
igc0@pci0:2:0:0: class=0x020000 rev=0x03 hdr=0x00 vendor=0x8086
device=0x15f3 subvendor=0x8086 subdevice=0x0000
vendor = 'Intel Corporation'
device = 'Ethernet Controller I225-V'
class = network
subclass = ethernet
bar [10] = type Memory, range 32, base 0x80600000, size 1048576,
enabled
bar [1c] = type Memory, range 32, base 0x80700000, size 16384,
enabled
cap 01[40] = powerspec 3 supports D0 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit, vector masks
cap 11[70] = MSI-X supports 5 messages, enabled
Table in map 0x1c[0x0], PBA in map 0x1c[0x2000]
cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR RO NS
max read 512
link x1(x1) speed 5.0(5.0) ASPM L1(L1)
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
ecap 0003[140] = Serial 1 00e269ffff5a4be9
ecap 0018[1c0] = LTR 1
ecap 001f[1f0] = Precision Time Measurement 1
ecap 001e[1e0] = L1 PM Substates 1
Jasper Lake chipset N5105 CPU 2.00GHz
---Mike
