On 9/26/2023 3:28 AM, Kurt Jaeger wrote:
Hi!
A small annoyance, but I was wondering why "ifconfig -v ix0" seems to
take
a "long time" compared to other 10G nics. e.g.
[...]
Which version of the ix driver did you load ? The base one or
the one from the ports, net/intel-ix-kmod ? I'm not sure
[email protected] is reading this list, so maybe pointing
them to the issue via some PR would be useful.
This is just the base driver, built in ix with copper PHY
pciconf -lvcb ix0
ix0@pci0:1:0:0: class=0x020000 rev=0x01 hdr=0x00 vendor=0x8086
device=0x1528 subvendor=0x15d9 subdevice=0x1528
vendor = 'Intel Corporation'
device = 'Ethernet Controller 10-Gigabit X540-AT2'
class = network
subclass = ethernet
bar [10] = type Prefetchable Memory, range 64, base 0xc7c00000,
size 2097152, enabled
bar [18] = type I/O Port, range 32, base 0x6020, size 32, enabled
bar [20] = type Prefetchable Memory, range 64, base 0xc7e04000,
size 16384, enabled
cap 01[40] = powerspec 3 supports D0 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit, vector masks
cap 11[70] = MSI-X supports 64 messages, enabled
Table in map 0x20[0x0], PBA in map 0x20[0x2000]
cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR NS
max read 512
link x8(x8) speed 5.0(5.0) ASPM disabled(L0s/L1)
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 1 corrected
ecap 000e[150] = ARI 1
ecap 0010[160] = SR-IOV 1 IOV disabled, Memory Space disabled, ARI
disabled
0 VFs configured out of 64 supported
First VF RID Offset 0x0180, VF RID Stride 0x0002
VF Device ID 0x1515
Page Sizes: 4096 (enabled), 8192, 65536, 262144,
1048576, 4194304
ecap 000d[1d0] = ACS 1 Source Validation unavailable, Translation
Blocking unavailable
P2P Req Redirect unavailable, P2P Cmpl Redirect
unavailable
P2P Upstream Forwarding unavailable, P2P Egress
Control unavailable
P2P Direct Translated unavailable, Enhanced
Capability unavailable
