Hello,
Since I upgrade my rockpro64 to
FreeBSD keystone.lab.bel 14.1-STABLE FreeBSD 14.1-STABLE #0
stable/14-n268744-79c34d704f31: Sun Sep 29 13:38:10 CEST 2024
[email protected]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
when I start
cpuset -c -l 4-5 poudriere bulk -j 14aarch64 -z pine64 -f
/usr/local/poudriere/pine64-pkglst
everything is running at least 2 to 3 times slower than under
FreeBSD 14.1-STABLE #0 stable/14-n267830-339b47f01985
Some build repeatedly fail with eg :
pkg-static: Fail to chmod /afm/public/nanumtype1/nanummjbd7.afm:Bad file
descriptor
previously this fail was rather uncommon.
Moreover at soon as poudriere bulk start top -SH show:
last pid: 79185; load averages: 3.53, 3.72, 3.85
up 5+01:17:19 17:14:19
502 threads: 13 running, 463 sleeping, 26 waiting
CPU: 0.1% user, 0.2% nice, 38.8% system, 0.1% interrupt, 60.9% idle
Mem: 77M Active, 422M Inact, 4112K Laundry, 1318M Wired, 1987M Free
ARC: 676M Total, 284M MFU, 66M MRU, 11M Anon, 14M Header, 301M Other
69M Compressed, 294M Uncompressed, 4.25:1 Ratio
Swap: 8192M Total, 35M Used, 8157M Free
PID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND
0 root -8 - 0B 2432K CPU1 1 96.8H 99.61%
kernel{arc_prune}
11 root 187 ki31 0B 96K RUN 0 98.0H 98.76% idle{idle:
cpu0}
11 root 187 ki31 0B 96K RUN 1 94.6H 97.63% idle{idle:
cpu1}
26388 root 135 4 110M 78M CPU5 5 82:53 94.30% bsdtar
11 root 187 ki31 0B 96K RUN 3 91.9H 79.92% idle{idle:
cpu3}
11 root 187 ki31 0B 96K RUN 2 98.8H 61.87% idle{idle:
cpu2}
11 root 187 ki31 0B 96K RUN 5 26.5H 27.09% idle{idle:
cpu5}
......
arc_prone running at 99% on one of the CPU all the time, note that 1987M Free.
Does anyone encounter this sort of problems?
Thanks for your time
Henri
