hi Kurt & Warner:
im trying on a PCengines apu2 fbsd 14.2, but have the same symptoms, no console.
dmesg|grep uart -> nothing.
after some trials the best i have is:
the bsd-menu showing
5. Cons: Serial
and only the kernel messages.
no /dev/console, no /dev/ttyu0, but can remote login.
btw, all works fine with a 13.1 kernel
> On 8 Dec 2024, at 20:27, Kurt Jaeger <[email protected]> wrote:
>
> Hi!
>
>> So, there should be a line like
>>
>> uart0: console (115200,n,8,1)
>>
>> if not, then hw.uart.console isn't making it through.
>
> So somehow the uarts are not found during initialization ?
>
>> If you are using a custom kernel,
>
> It's the generic kernel.
>
>> you can add that to a file and add 'env
>> /path/to/file/on/build/host' to the kernel config to wire that into the
>> kernel, should the boot path make it hard to set an initial environment
>> otherwise. Also, DHCP should still try to grab /boot/loader.conf from the
>> tftp/http server as well. That might also be something that needs debugging
>> (or hopefully just correct config).
>
> I'll investigate further.
>
> --
> [email protected] +49 171 3101372 Now what ?
