There are few places where we are checking for macversion and revsions before RTC is powered ON. However we are reading the macversion and revisions only after RTC is powered ON and so both macversion and revisions are actully zero and this leads to incorrect srev checks.
fix this by reading the macversion and revisisons even before we start using them. There is no reason why should we delay reading this info until RTC is powered on as this is just a register information. Cc: Stable Kernel <[email protected]> Signed-off-by: Senthil Balasubramanian <[email protected]> --- drivers/net/wireless/ath/ath9k/hw.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index ddda76f..c9b7f1e 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1078,13 +1078,13 @@ static bool ath9k_hw_set_reset_power_on(struct ath_hw *ah) return false; } - ath9k_hw_read_revisions(ah); - return ath9k_hw_set_reset(ah, ATH9K_RESET_WARM); } static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type) { + ath9k_hw_read_revisions(ah); + if (AR_SREV_9300_20_OR_LATER(ah)) { REG_WRITE(ah, AR_WA, ah->WARegVal); udelay(10); -- 1.7.3.4 _______________________________________________ stable mailing list [email protected] http://linux.kernel.org/mailman/listinfo/stable
