Your commit:
[SCSI] mpt2sas: Fix device removal handshake for zoned devices
When zoning end devices, the driver is not sending device
removal handshake alogrithm to firmware. This results in controller
firmware not sending sas topology add events the next time the device is
added. The fix is the driver should be doing the device removal handshake
even though the PHYSTATUS_VACANT bit is set in the PhyStatus of the
event data. The current design is avoiding the handshake when the
VACANT bit is set in the phy status.
Signed-off-by: Kashyap Desai <[email protected]>
Cc: [email protected]
Signed-off-by: James Bottomley <[email protected]>
has been added to the upstream SCSI tree
You can find it here:
http://git.kernel.org/?p=linux/kernel/git/jejb/scsi-rc-fixes-2.6.git;a=commit;h=4dc2757a2e9a9d1f2faee4fc6119276fc0061c16
This patch is scheduled to be pushed for 2.6.37
James Bottomley
P.S. If you find this email unwanted, set up a procmail rule junking on
the header:
X-Git-Tree: SCSI
_______________________________________________
stable mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/stable
