commit: 4dc2757a2e9a9d1f2faee4fc6119276fc0061c16 From: Kashyap, Desai <[email protected]> Date: Tue, 4 Jan 2011 11:32:13 +0530 Subject: [PATCH] [SCSI] mpt2sas: Fix device removal handshake for zoned devices
When zoning end devices, the driver is not sending device removal handshake alogrithm to firmware. This results in controller firmware not sending sas topology add events the next time the device is added. The fix is the driver should be doing the device removal handshake even though the PHYSTATUS_VACANT bit is set in the PhyStatus of the event data. The current design is avoiding the handshake when the VACANT bit is set in the phy status. Signed-off-by: Kashyap Desai <[email protected]> Cc: [email protected] Signed-off-by: James Bottomley <[email protected]> --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 3 --- 1 files changed, 0 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index eda347c..95d8274 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2981,9 +2981,6 @@ _scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc, u16 handle; for (i = 0 ; i < event_data->NumEntries; i++) { - if (event_data->PHY[i].PhyStatus & - MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) - continue; handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); if (!handle) continue; _______________________________________________ stable mailing list [email protected] http://linux.kernel.org/mailman/listinfo/stable
