This is a note to let you know that I've just added the patch titled
MIPS: MTX-1: Make au1000_eth probe all PHY addresses
to the 2.6.37-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mips-mtx-1-make-au1000_eth-probe-all-phy-addresses.patch
and it can be found in the queue-2.6.37 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.
>From bf3a1eb85967dcbaae42f4fcb53c2392cec32677 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <[email protected]>
Date: Sun, 27 Feb 2011 19:53:53 +0100
Subject: MIPS: MTX-1: Make au1000_eth probe all PHY addresses
From: Florian Fainelli <[email protected]>
commit bf3a1eb85967dcbaae42f4fcb53c2392cec32677 upstream.
When au1000_eth probes the MII bus for PHY address, if we do not set
au1000_eth platform data's phy_search_highest_address, the MII probing
logic will exit early and will assume a valid PHY is found at address 0.
For MTX-1, the PHY is at address 31, and without this patch, the link
detection/speed/duplex would not work correctly.
Signed-off-by: Florian Fainelli <[email protected]>
To: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/2111/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/alchemy/mtx-1/platform.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -28,6 +28,8 @@
#include <linux/mtd/physmap.h>
#include <mtd/mtd-abi.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
+
static struct gpio_keys_button mtx1_gpio_button[] = {
{
.gpio = 207,
@@ -140,10 +142,17 @@ static struct __initdata platform_device
&mtx1_mtd,
};
+static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = {
+ .phy_search_highest_addr = 1,
+ .phy1_search_mac0 = 1,
+};
+
static int __init mtx1_register_devices(void)
{
int rc;
+ au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata);
+
rc = gpio_request(mtx1_gpio_button[0].gpio,
mtx1_gpio_button[0].desc);
if (rc < 0) {
Patches currently in stable-queue which might be from [email protected] are
queue-2.6.37/mips-mtx-1-make-au1000_eth-probe-all-phy-addresses.patch
_______________________________________________
stable mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/stable
