commit 4bdd1e978ede034c1211957eb17eaf50de00d234 upstream The PCU lock should be used to contend TX DMA as well, this will be done next.
This is part of a series of patches which fix stopping TX DMA completley when requested on the driver. For more details about this issue refer to this thread: http://marc.info/?l=linux-wireless&m=128629803703756&w=2 Tested-by: Ben Greear <[email protected]> Cc: Kyungwan Nam <[email protected]> Cc: [email protected] Signed-off-by: Luis R. Rodriguez <[email protected]> Signed-off-by: John W. Linville <[email protected]> --- drivers/net/wireless/ath/ath9k/ath9k.h | 2 +- drivers/net/wireless/ath/ath9k/main.c | 42 ++++++++++++++++---------------- drivers/net/wireless/ath/ath9k/recv.c | 2 +- 3 files changed, 23 insertions(+), 23 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index aaaa100..02d1cf5 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -310,7 +310,6 @@ struct ath_rx { u8 rxotherant; u32 *rxlink; unsigned int rxfilter; - spinlock_t pcu_lock; spinlock_t rxbuflock; struct list_head rxbuf; struct ath_descdma rxdma; @@ -602,6 +601,7 @@ struct ath_softc { int irq; spinlock_t sc_serial_rw; spinlock_t sc_pm_lock; + spinlock_t sc_pcu_lock; struct mutex mutex; struct work_struct paprd_work; struct work_struct hw_check_work; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index e946ac3..5e3e979 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -246,7 +246,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, ath9k_hw_set_interrupts(ah, 0); stopped = ath_drain_all_txq(sc, false); - spin_lock_bh(&sc->rx.pcu_lock); + spin_lock_bh(&sc->sc_pcu_lock); if (!ath_stoprecv(sc)) stopped = false; @@ -273,7 +273,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, "Unable to reset channel (%u MHz), " "reset status %d\n", channel->center_freq, r); - spin_unlock_bh(&sc->rx.pcu_lock); + spin_unlock_bh(&sc->sc_pcu_lock); goto ps_restore; } @@ -281,11 +281,11 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, ath_print(common, ATH_DBG_FATAL, "Unable to restart recv logic\n"); r = -EIO; - spin_unlock_bh(&sc->rx.pcu_lock); + spin_unlock_bh(&sc->sc_pcu_lock); goto ps_restore; } - spin_unlock_bh(&sc->rx.pcu_lock); + spin_unlock_bh(&sc->sc_pcu_lock); ath_update_txpow(sc); ath9k_hw_set_interrupts(ah, ah->imask); @@ -622,7 +622,7 @@ void ath9k_tasklet(unsigned long data) rxmask = (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN); if (status & rxmask) { - spin_lock_bh(&sc->rx.pcu_lock); + spin_lock_bh(&sc->sc_pcu_lock); /* Check for high priority Rx first */ if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) && @@ -630,7 +630,7 @@ void ath9k_tasklet(unsigned long data) ath_rx_tasklet(sc, 0, true); ath_rx_tasklet(sc, 0, false); - spin_unlock_bh(&sc->rx.pcu_lock); + spin_unlock_bh(&sc->sc_pcu_lock); } if (status & ATH9K_INT_TX) { @@ -885,7 +885,7 @@ void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw) if (!ah->curchan) ah->curchan = ath_get_curchannel(sc, sc->hw); - spin_lock_bh(&sc->rx.pcu_lock); + spin_lock_bh(&sc->sc_pcu_lock); r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false); if (r) { ath_print(common, ATH_DBG_FATAL, @@ -898,10 +898,10 @@ void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw) if (ath_startrecv(sc) != 0) { ath_print(common, ATH_DBG_FATAL, "Unable to restart recv logic\n"); - spin_unlock_bh(&sc->rx.pcu_lock); + spin_unlock_bh(&sc->sc_pcu_lock); return; } - spin_unlock_bh(&sc->rx.pcu_lock); + spin_unlock_bh(&sc->sc_pcu_lock); if (sc->sc_flags & SC_OP_BEACONS) ath_beacon_config(sc, NULL); /* restart beacons */ @@ -941,7 +941,7 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw) ath_drain_all_txq(sc, false); /* clear pending tx frames */ - spin_lock_bh(&sc->rx.pcu_lock); + spin_lock_bh(&sc->sc_pcu_lock); ath_stoprecv(sc); /* turn off frame recv */ ath_flushrecv(sc); /* flush recv queue */ @@ -959,7 +959,7 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw) ath9k_hw_phy_disable(ah); - spin_unlock_bh(&sc->rx.pcu_lock); + spin_unlock_bh(&sc->sc_pcu_lock); ath9k_hw_configpcipowersave(ah, 1, 1); ath9k_ps_restore(sc); @@ -981,7 +981,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) ath9k_hw_set_interrupts(ah, 0); ath_drain_all_txq(sc, retry_tx); - spin_lock_bh(&sc->rx.pcu_lock); + spin_lock_bh(&sc->sc_pcu_lock); ath_stoprecv(sc); ath_flushrecv(sc); @@ -995,7 +995,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) ath_print(common, ATH_DBG_FATAL, "Unable to start recv logic\n"); - spin_unlock_bh(&sc->rx.pcu_lock); + spin_unlock_bh(&sc->sc_pcu_lock); /* * We may be doing a reset in response to a request @@ -1159,14 +1159,14 @@ static int ath9k_start(struct ieee80211_hw *hw) * be followed by initialization of the appropriate bits * and then setup of the interrupt mask. */ - spin_lock_bh(&sc->rx.pcu_lock); + spin_lock_bh(&sc->sc_pcu_lock); r = ath9k_hw_reset(ah, init_channel, ah->caldata, false); if (r) { ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d " "(freq %u MHz)\n", r, curchan->center_freq); - spin_unlock_bh(&sc->rx.pcu_lock); + spin_unlock_bh(&sc->sc_pcu_lock); goto mutex_unlock; } @@ -1187,10 +1187,10 @@ static int ath9k_start(struct ieee80211_hw *hw) ath_print(common, ATH_DBG_FATAL, "Unable to start recv logic\n"); r = -EIO; - spin_unlock_bh(&sc->rx.pcu_lock); + spin_unlock_bh(&sc->sc_pcu_lock); goto mutex_unlock; } - spin_unlock_bh(&sc->rx.pcu_lock); + spin_unlock_bh(&sc->sc_pcu_lock); /* Setup our intr mask. */ ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL | @@ -1392,14 +1392,14 @@ static void ath9k_stop(struct ieee80211_hw *hw) if (!(sc->sc_flags & SC_OP_INVALID)) { ath_drain_all_txq(sc, false); - spin_lock_bh(&sc->rx.pcu_lock); + spin_lock_bh(&sc->sc_pcu_lock); ath_stoprecv(sc); ath9k_hw_phy_disable(ah); - spin_unlock_bh(&sc->rx.pcu_lock); + spin_unlock_bh(&sc->sc_pcu_lock); } else { - spin_lock_bh(&sc->rx.pcu_lock); + spin_lock_bh(&sc->sc_pcu_lock); sc->rx.rxlink = NULL; - spin_unlock_bh(&sc->rx.pcu_lock); + spin_unlock_bh(&sc->sc_pcu_lock); } /* disable HAL and put h/w to sleep */ diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index d6bbb57..71b4092 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -317,7 +317,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) struct ath_buf *bf; int error = 0; - spin_lock_init(&sc->rx.pcu_lock); + spin_lock_init(&sc->sc_pcu_lock); sc->sc_flags &= ~SC_OP_RXFLUSH; spin_lock_init(&sc->rx.rxbuflock); -- 1.7.4.15.g7811d _______________________________________________ stable mailing list [email protected] http://linux.kernel.org/mailman/listinfo/stable
