From: Uwe Kleine-König <[email protected]>

If cts changes between reading the level at the cts input (USR1_RTSS)
and acking the irq (USR1_RTSD) the last edge doesn't generate an irq and
uart_handle_cts_change is called with a outdated value for cts.

The race was introduced by commit

        ceca629 ([ARM] 2971/1: i.MX uart handle rts irq)

Reported-by: Arwed Springer <[email protected]>
Tested-by: Arwed Springer <[email protected]>
Cc: [email protected] # 2.6.14+
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
 drivers/tty/serial/imx.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index cb36b0d..62df72d 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -382,12 +382,13 @@ static void imx_start_tx(struct uart_port *port)
 static irqreturn_t imx_rtsint(int irq, void *dev_id)
 {
        struct imx_port *sport = dev_id;
-       unsigned int val = readl(sport->port.membase + USR1) & USR1_RTSS;
+       unsigned int val;
        unsigned long flags;
 
        spin_lock_irqsave(&sport->port.lock, flags);
 
        writel(USR1_RTSD, sport->port.membase + USR1);
+       val = readl(sport->port.membase + USR1) & USR1_RTSS;
        uart_handle_cts_change(&sport->port, !!val);
        wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 
-- 
1.7.4.2

_______________________________________________
stable mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/stable

Reply via email to