The XB113 cards are single band, 5 GHz-only, but the default settings were configured to assume it was dual band. Users of these cards then would see 2.4 GHz channels but you would never get any scan results from these channels given that the radio is not present.
Cc: [email protected] Cc: Fiona Cain <[email protected]> Cc: Ray Li <[email protected]> Cc: Kathy Giori <[email protected]> Cc: Aeolus Yang <[email protected]> Cc: Dan Friedman <[email protected]> Signed-off-by: Luis R. Rodriguez <[email protected]> --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 3b13c1b..c35a68d 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -652,7 +652,7 @@ static const struct ar9300_eeprom ar9300_x113 = { .regDmn = { LE16(0), LE16(0x1f) }, .txrxMask = 0x77, /* 4 bits tx and 4 bits rx */ .opCapFlags = { - .opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A, + .opFlags = AR5416_OPFLAGS_11A, .eepMisc = 0, }, .rfSilent = 0, -- 1.7.4.15.g7811d _______________________________________________ stable mailing list [email protected] http://linux.kernel.org/mailman/listinfo/stable
