commit: 9ba7f4f5eba5f4b44c7796bbad29f8ec3a7d5864
From: "Luis R. Rodriguez" <[email protected]>
Date: Wed, 11 May 2011 14:57:26 -0700
Subject: [PATCH] ath9k_hw: fix dual band assumption for XB113

The XB113 cards are single band, 5 GHz-only, but the
default settings were configured to assume it was dual
band. Users of these cards then would see 2.4 GHz channels
but you would never get any scan results from these channels
given that the radio is not present.

Cc: [email protected]
Cc: Fiona Cain <[email protected]>
Cc: Ray Li <[email protected]>
Cc: Kathy Giori <[email protected]>
Cc: Aeolus Yang <[email protected]>
Cc: Dan Friedman <[email protected]>
Signed-off-by: Luis R. Rodriguez <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c 
b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 070dc8b..0647cc5 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -652,7 +652,7 @@ static const struct ar9300_eeprom ar9300_x113 = {
                .regDmn = { LE16(0), LE16(0x1f) },
                .txrxMask =  0x77, /* 4 bits tx and 4 bits rx */
                .opCapFlags = {
-                       .opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
+                       .opFlags = AR5416_OPFLAGS_11A,
                        .eepMisc = 0,
                },
                .rfSilent = 0,

_______________________________________________
stable mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/stable

Reply via email to