This is a note to let you know that I've just added the patch titled
USB: core: Tolerate protocol stall during hub and port
to the 2.6.33-longterm tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/longterm/longterm-queue-2.6.33.git;a=summary
The filename of the patch is:
usb-core-tolerate-protocol-stall-during-hub-and-port.patch
and it can be found in the queue-2.6.33 subdirectory.
If you, or anyone else, feels it should not be added to the 2.6.33 longterm
tree,
please let <[email protected]> know about it.
>From 3824c1ddaf744be44b170a335332b9d6afe79254 Mon Sep 17 00:00:00 2001
From: Libor Pechacek <[email protected]>
Date: Fri, 20 May 2011 14:53:25 +0200
Subject: USB: core: Tolerate protocol stall during hub and port
status read
From: Libor Pechacek <[email protected]>
commit 3824c1ddaf744be44b170a335332b9d6afe79254 upstream.
Protocol stall should not be fatal while reading port or hub status as it is
transient state. Currently hub EP0 STALL during port status read results in
failed device enumeration. This has been observed with ST-Ericsson (formerly
Philips) USB 2.0 Hub (04cc:1521) after connecting keyboard.
Signed-off-by: Libor Pechacek <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/hub.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -327,7 +327,8 @@ static int get_hub_status(struct usb_dev
{
int i, status = -ETIMEDOUT;
- for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+ for (i = 0; i < USB_STS_RETRIES &&
+ (status == -ETIMEDOUT || status == -EPIPE); i++) {
status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
data, sizeof(*data), USB_STS_TIMEOUT);
@@ -343,7 +344,8 @@ static int get_port_status(struct usb_de
{
int i, status = -ETIMEDOUT;
- for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+ for (i = 0; i < USB_STS_RETRIES &&
+ (status == -ETIMEDOUT || status == -EPIPE); i++) {
status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1,
data, sizeof(*data), USB_STS_TIMEOUT);
Patches currently in longterm-queue-2.6.33 which might be from
[email protected] are
/home/gregkh/linux/longterm/longterm-queue-2.6.33/queue-2.6.33/usb-core-tolerate-protocol-stall-during-hub-and-port.patch
_______________________________________________
stable mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/stable
