This is a note to let you know that I've just added the patch titled
xhci: Fix encoding for HS bulk/control NAK rate.
to the 3.0-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
xhci-fix-encoding-for-hs-bulk-control-nak-rate.patch
and it can be found in the queue-3.0 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.
>From 340a3504fd39dad753ba908fb6f894ee81fc3ae2 Mon Sep 17 00:00:00 2001
From: Sarah Sharp <[email protected]>
Date: Mon, 13 Feb 2012 14:42:11 -0800
Subject: xhci: Fix encoding for HS bulk/control NAK rate.
From: Sarah Sharp <[email protected]>
commit 340a3504fd39dad753ba908fb6f894ee81fc3ae2 upstream.
The xHCI 0.96 spec says that HS bulk and control endpoint NAK rate must
be encoded as an exponent of two number of microframes. The endpoint
descriptor has the NAK rate encoded in number of microframes. We were
just copying the value from the endpoint descriptor into the endpoint
context interval field, which was not correct. This lead to the VIA
host rejecting the add of a bulk OUT endpoint from any USB 2.0 mass
storage device.
The fix is to use the correct encoding. Refactor the code to convert
number of frames to an exponential number of microframes, and make sure
we convert the number of microframes in HS bulk and control endpoints to
an exponent.
This should be back ported to kernels as old as 2.6.31, that contain the
commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math
in xhci_get_endpoint_interval"
Signed-off-by: Sarah Sharp <[email protected]>
Tested-by: Felipe Contreras <[email protected]>
Suggested-by: Andiry Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-mem.c | 32 ++++++++++++++++++++++++--------
1 file changed, 24 insertions(+), 8 deletions(-)
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1002,26 +1002,42 @@ static unsigned int xhci_parse_exponent_
}
/*
- * Convert bInterval expressed in frames (in 1-255 range) to exponent of
+ * Convert bInterval expressed in microframes (in 1-255 range) to exponent of
* microframes, rounded down to nearest power of 2.
*/
-static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
- struct usb_host_endpoint *ep)
+static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
+ struct usb_host_endpoint *ep, unsigned int desc_interval,
+ unsigned int min_exponent, unsigned int max_exponent)
{
unsigned int interval;
- interval = fls(8 * ep->desc.bInterval) - 1;
- interval = clamp_val(interval, 3, 10);
- if ((1 << interval) != 8 * ep->desc.bInterval)
+ interval = fls(desc_interval) - 1;
+ interval = clamp_val(interval, min_exponent, max_exponent);
+ if ((1 << interval) != desc_interval)
dev_warn(&udev->dev,
"ep %#x - rounding interval to %d microframes, ep desc
says %d microframes\n",
ep->desc.bEndpointAddress,
1 << interval,
- 8 * ep->desc.bInterval);
+ desc_interval);
return interval;
}
+static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ return xhci_microframes_to_exponent(udev, ep,
+ ep->desc.bInterval, 0, 15);
+}
+
+
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ return xhci_microframes_to_exponent(udev, ep,
+ ep->desc.bInterval * 8, 3, 10);
+}
+
/* Return the polling or NAK interval.
*
* The polling interval is expressed in "microframes". If xHCI's Interval
field
@@ -1040,7 +1056,7 @@ static unsigned int xhci_get_endpoint_in
/* Max NAK rate */
if (usb_endpoint_xfer_control(&ep->desc) ||
usb_endpoint_xfer_bulk(&ep->desc)) {
- interval = ep->desc.bInterval;
+ interval = xhci_parse_microframe_interval(udev, ep);
break;
}
/* Fall through - SS and HS isoc/int have same decoding */
Patches currently in stable-queue which might be from
[email protected] are
queue-3.0/usb-set-hub-depth-after-usb3-hub-reset.patch
queue-3.0/usb-fix-handoff-when-bios-disables-host-pci-device.patch
queue-3.0/xhci-fix-encoding-for-hs-bulk-control-nak-rate.patch
queue-3.0/xhci-fix-oops-caused-by-more-usb2-ports-than-usb3-ports.patch
queue-3.0/usb-remove-duplicate-usb-3.0-hub-feature-defines.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
