The patch titled
Subject: rapidio/tsi721: fix bug in register offset definitions
has been removed from the -mm tree. Its filename was
rapidio-tsi721-fix-bug-in-register-offset-definitions.patch
This patch was dropped because it was merged into mainline or a subsystem tree
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
From: Alexandre Bounine <alexandre.boun...@idt.com>
Subject: rapidio/tsi721: fix bug in register offset definitions
Fix indexed register offset definitions that use decimal (wrong) instead
of hexadecimal (correct) notation for indexing multipliers.
Incorrect definitions do not affect Tsi721 driver in its current default
configuration because it uses only IDB queue 0. Loss of inbound doorbell
functionality should be observed if queue other than 0 is used.
Signed-off-by: Alexandre Bounine <alexandre.boun...@idt.com>
Cc: Matt Porter <mpor...@kernel.crashing.org>
Cc: Chul Kim <chul....@idt.com>
Cc: <stable@vger.kernel.org> [3.2+]
Signed-off-by: Andrew Morton <a...@linux-foundation.org>
---
drivers/rapidio/devices/tsi721.h | 30 ++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff -puN
drivers/rapidio/devices/tsi721.h~rapidio-tsi721-fix-bug-in-register-offset-definitions
drivers/rapidio/devices/tsi721.h
---
a/drivers/rapidio/devices/tsi721.h~rapidio-tsi721-fix-bug-in-register-offset-definitions
+++ a/drivers/rapidio/devices/tsi721.h
@@ -118,34 +118,34 @@
#define TSI721_IDB_ENTRY_SIZE 64
-#define TSI721_IDQ_CTL(x) (0x20000 + (x) * 1000)
+#define TSI721_IDQ_CTL(x) (0x20000 + (x) * 0x1000)
#define TSI721_IDQ_SUSPEND 0x00000002
#define TSI721_IDQ_INIT 0x00000001
-#define TSI721_IDQ_STS(x) (0x20004 + (x) * 1000)
+#define TSI721_IDQ_STS(x) (0x20004 + (x) * 0x1000)
#define TSI721_IDQ_RUN 0x00200000
-#define TSI721_IDQ_MASK(x) (0x20008 + (x) * 1000)
+#define TSI721_IDQ_MASK(x) (0x20008 + (x) * 0x1000)
#define TSI721_IDQ_MASK_MASK 0xffff0000
#define TSI721_IDQ_MASK_PATT 0x0000ffff
-#define TSI721_IDQ_RP(x) (0x2000c + (x) * 1000)
+#define TSI721_IDQ_RP(x) (0x2000c + (x) * 0x1000)
#define TSI721_IDQ_RP_PTR 0x0007ffff
-#define TSI721_IDQ_WP(x) (0x20010 + (x) * 1000)
+#define TSI721_IDQ_WP(x) (0x20010 + (x) * 0x1000)
#define TSI721_IDQ_WP_PTR 0x0007ffff
-#define TSI721_IDQ_BASEL(x) (0x20014 + (x) * 1000)
+#define TSI721_IDQ_BASEL(x) (0x20014 + (x) * 0x1000)
#define TSI721_IDQ_BASEL_ADDR 0xffffffc0
-#define TSI721_IDQ_BASEU(x) (0x20018 + (x) * 1000)
-#define TSI721_IDQ_SIZE(x) (0x2001c + (x) * 1000)
+#define TSI721_IDQ_BASEU(x) (0x20018 + (x) * 0x1000)
+#define TSI721_IDQ_SIZE(x) (0x2001c + (x) * 0x1000)
#define TSI721_IDQ_SIZE_VAL(size) (__fls(size) - 4)
#define TSI721_IDQ_SIZE_MIN 512
#define TSI721_IDQ_SIZE_MAX (512 * 1024)
-#define TSI721_SR_CHINT(x) (0x20040 + (x) * 1000)
-#define TSI721_SR_CHINTE(x) (0x20044 + (x) * 1000)
-#define TSI721_SR_CHINTSET(x) (0x20048 + (x) * 1000)
+#define TSI721_SR_CHINT(x) (0x20040 + (x) * 0x1000)
+#define TSI721_SR_CHINTE(x) (0x20044 + (x) * 0x1000)
+#define TSI721_SR_CHINTSET(x) (0x20048 + (x) * 0x1000)
#define TSI721_SR_CHINT_ODBOK 0x00000020
#define TSI721_SR_CHINT_IDBQRCV 0x00000010
#define TSI721_SR_CHINT_SUSP 0x00000008
@@ -156,7 +156,7 @@
#define TSI721_IBWIN_NUM 8
-#define TSI721_IBWINLB(x) (0x29000 + (x) * 20)
+#define TSI721_IBWINLB(x) (0x29000 + (x) * 0x20)
#define TSI721_IBWINLB_BA 0xfffff000
#define TSI721_IBWINLB_WEN 0x00000001
@@ -187,13 +187,13 @@
*/
#define TSI721_OBWIN_NUM TSI721_PC2SR_WINS
-#define TSI721_OBWINLB(x) (0x40000 + (x) * 20)
+#define TSI721_OBWINLB(x) (0x40000 + (x) * 0x20)
#define TSI721_OBWINLB_BA 0xffff8000
#define TSI721_OBWINLB_WEN 0x00000001
-#define TSI721_OBWINUB(x) (0x40004 + (x) * 20)
+#define TSI721_OBWINUB(x) (0x40004 + (x) * 0x20)
-#define TSI721_OBWINSZ(x) (0x40008 + (x) * 20)
+#define TSI721_OBWINSZ(x) (0x40008 + (x) * 0x20)
#define TSI721_OBWINSZ_SIZE 0x00001f00
#define TSI721_OBWIN_SIZE(size) (__fls(size) - 15)
_
Patches currently in -mm which might be from alexandre.boun...@idt.com are
origin.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
