commit: 28c56ea1431421dec51b7b229369e991481453df From: Shengzhou Liu <[email protected]> Date: Thu, 16 Feb 2012 18:02:20 +0800 Subject: powerpc/usb: fix bug of kernel hang when initializing usb
If USB UTMI PHY is not enable, writing to portsc register will lead to kernel hang during boot up. Signed-off-by: Shengzhou Liu <[email protected]> Reported-by: Benjamin Herrenschmidt <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/usb/host/ehci-fsl.c | 4 ++++ drivers/usb/host/ehci-fsl.h | 1 + 2 files changed, 5 insertions(+), 0 deletions(-) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index cd30ea4..7a15c22 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -216,6 +216,8 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, unsigned int port_offset) { u32 portsc; + struct usb_hcd *hcd = ehci_to_hcd(ehci); + void __iomem *non_ehci = hcd->regs; portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]); portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW); @@ -231,6 +233,8 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, portsc |= PORT_PTS_PTW; /* fall through */ case FSL_USB2_PHY_UTMI: + /* enable UTMI PHY */ + setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN); portsc |= PORT_PTS_UTMI; break; case FSL_USB2_PHY_NONE: diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index 6d5a94e..863fb0c 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -47,6 +47,7 @@ #define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */ #define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */ #define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */ +#define CTRL_UTMI_PHY_EN (1<<9) #define CTRL_PHY_CLK_VALID (1 << 17) #define SNOOP_SIZE_2GB 0x1e #endif /* _EHCI_FSL_H */ -- 1.7.3.4 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
