From: Kishon Vijay Abraham I <[email protected]> During modprobe of gadget driver, pullup is called after udc_start. In order to make the exit path symmetric when removing a gadget driver, call pullup before ->udc_stop.
This is needed to avoid issues with PM where udc_stop disables the module completely (put IP in reset state, cut functional and interface clocks, and so on), which prevents us from accessing the IP's address space, thus creating the possibility of an abort exception when we try to access IP's address space after clocks are off. Cc: [email protected] Signed-off-by: Partha Basak <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Felipe Balbi <[email protected]> --- drivers/usb/gadget/udc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index c261887..2fa9865 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -264,8 +264,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) if (udc_is_newstyle(udc)) { udc->driver->disconnect(udc->gadget); udc->driver->unbind(udc->gadget); - usb_gadget_udc_stop(udc->gadget, udc->driver); usb_gadget_disconnect(udc->gadget); + usb_gadget_udc_stop(udc->gadget, udc->driver); } else { usb_gadget_stop(udc->gadget, udc->driver); } -- 1.7.9.2 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
