You need now to set the irq via gpio_to_irq. since d0fbda9add (ARM: at91/gpio: drop PIN_BASE)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]> Acked: Nicolas Ferre <[email protected]> Cc: [email protected] --- Hi Greg, this bug is present in 3.2 & 3.3 Best Regards, J. arch/arm/mach-at91/board-sam9261ek.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 065b5ee..2736453 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -76,8 +76,6 @@ static struct resource dm9000_resource[] = { .flags = IORESOURCE_MEM }, [2] = { - .start = AT91_PIN_PC11, - .end = AT91_PIN_PC11, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE, } @@ -121,6 +119,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = { static void __init ek_add_device_dm9000(void) { + struct resource *r = &dm9000_resource[2]; + /* Configure chip-select 2 (DM9000) */ sam9_smc_configure(0, 2, &dm9000_smc_config); @@ -130,6 +130,7 @@ static void __init ek_add_device_dm9000(void) /* Configure Interrupt pin as input, no pull-up */ at91_set_gpio_input(AT91_PIN_PC11, 0); + r->start = r->end = gpio_to_irq(AT91_PIN_PC11); platform_device_register(&dm9000_device); } #else -- 1.7.9.1 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
