This is a note to let you know that I've just added the patch titled

    pch_dma: Fix CTL register access issue

to the 3.0-stable tree which can be found at:
    
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     pch_dma-fix-ctl-register-access-issue.patch
and it can be found in the queue-3.0 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.


>From 0b052f4a088ddc47a5da23dd733522241314cfb4 Mon Sep 17 00:00:00 2001
From: Tomoya MORINAGA <[email protected]>
Date: Thu, 14 Jul 2011 09:52:38 +0900
Subject: pch_dma: Fix CTL register access issue

From: Tomoya MORINAGA <[email protected]>

commit 0b052f4a088ddc47a5da23dd733522241314cfb4 upstream.

Currently, Mode-Control register is accessed by read-modify-write.

According to DMA hardware specifications datasheet, prohibits this method.
Because this register resets to 0 by DMA HW after DMA transfer completes.
Thus, current read-modify-write processing can cause unexpected behavior.

The datasheet says in case of writing Mode-Control register, set the value for 
only target channel, the others must set '11b'.
e.g. Set DMA0=01b  DMA11=10b
CTL0=33333331h
CTL2=00002333h

NOTE:
CTL0 includes DMA0~7 Mode-Control register.
CTL2 includes DMA8~11 Mode-Control register.

This patch modifies the issue.

Signed-off-by: Tomoya MORINAGA <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Tomoya MORINAGA <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

---
 drivers/dma/pch_dma.c |   42 +++++++++++++++++++++++++++++++-----------
 1 file changed, 31 insertions(+), 11 deletions(-)

--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -62,6 +62,9 @@
 
 #define MAX_CHAN_NR                    8
 
+#define DMA_MASK_CTL0_MODE     0x33333333
+#define DMA_MASK_CTL2_MODE     0x00003333
+
 static unsigned int init_nr_desc_per_channel = 64;
 module_param(init_nr_desc_per_channel, uint, 0644);
 MODULE_PARM_DESC(init_nr_desc_per_channel,
@@ -210,10 +213,17 @@ static void pdc_set_dir(struct dma_chan
        struct pch_dma_chan *pd_chan = to_pd_chan(chan);
        struct pch_dma *pd = to_pd(chan->device);
        u32 val;
+       u32 mask_mode;
+       u32 mask_ctl;
 
        if (chan->chan_id < 8) {
                val = dma_readl(pd, CTL0);
 
+               mask_mode = DMA_CTL0_MODE_MASK_BITS <<
+                                       (DMA_CTL0_BITS_PER_CH * chan->chan_id);
+               mask_ctl = DMA_MASK_CTL0_MODE & ~(DMA_CTL0_MODE_MASK_BITS <<
+                                      (DMA_CTL0_BITS_PER_CH * chan->chan_id));
+               val &= mask_mode;
                if (pd_chan->dir == DMA_TO_DEVICE)
                        val |= 0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id +
                                       DMA_CTL0_DIR_SHIFT_BITS);
@@ -221,18 +231,24 @@ static void pdc_set_dir(struct dma_chan
                        val &= ~(0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id +
                                         DMA_CTL0_DIR_SHIFT_BITS));
 
+               val |= mask_ctl;
                dma_writel(pd, CTL0, val);
        } else {
                int ch = chan->chan_id - 8; /* ch8-->0 ch9-->1 ... ch11->3 */
                val = dma_readl(pd, CTL3);
 
+               mask_mode = DMA_CTL0_MODE_MASK_BITS <<
+                                               (DMA_CTL0_BITS_PER_CH * ch);
+               mask_ctl = DMA_MASK_CTL2_MODE & ~(DMA_CTL0_MODE_MASK_BITS <<
+                                                (DMA_CTL0_BITS_PER_CH * ch));
+               val &= mask_mode;
                if (pd_chan->dir == DMA_TO_DEVICE)
                        val |= 0x1 << (DMA_CTL0_BITS_PER_CH * ch +
                                       DMA_CTL0_DIR_SHIFT_BITS);
                else
                        val &= ~(0x1 << (DMA_CTL0_BITS_PER_CH * ch +
                                         DMA_CTL0_DIR_SHIFT_BITS));
-
+               val |= mask_ctl;
                dma_writel(pd, CTL3, val);
        }
 
@@ -244,26 +260,30 @@ static void pdc_set_mode(struct dma_chan
 {
        struct pch_dma *pd = to_pd(chan->device);
        u32 val;
+       u32 mask_ctl;
+       u32 mask_dir;
 
        if (chan->chan_id < 8) {
+               mask_ctl = DMA_MASK_CTL0_MODE & ~(DMA_CTL0_MODE_MASK_BITS <<
+                          (DMA_CTL0_BITS_PER_CH * chan->chan_id));
+               mask_dir = 1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id +\
+                                DMA_CTL0_DIR_SHIFT_BITS);
                val = dma_readl(pd, CTL0);
-
-               val &= ~(DMA_CTL0_MODE_MASK_BITS <<
-                       (DMA_CTL0_BITS_PER_CH * chan->chan_id));
+               val &= mask_dir;
                val |= mode << (DMA_CTL0_BITS_PER_CH * chan->chan_id);
-
+               val |= mask_ctl;
                dma_writel(pd, CTL0, val);
        } else {
                int ch = chan->chan_id - 8; /* ch8-->0 ch9-->1 ... ch11->3 */
-
+               mask_ctl = DMA_MASK_CTL2_MODE & ~(DMA_CTL0_MODE_MASK_BITS <<
+                                                (DMA_CTL0_BITS_PER_CH * ch));
+               mask_dir = 1 << (DMA_CTL0_BITS_PER_CH * ch +\
+                                DMA_CTL0_DIR_SHIFT_BITS);
                val = dma_readl(pd, CTL3);
-
-               val &= ~(DMA_CTL0_MODE_MASK_BITS <<
-                       (DMA_CTL0_BITS_PER_CH * ch));
+               val &= mask_dir;
                val |= mode << (DMA_CTL0_BITS_PER_CH * ch);
-
+               val |= mask_ctl;
                dma_writel(pd, CTL3, val);
-
        }
 
        dev_dbg(chan2dev(chan), "pdc_set_mode: chan %d -> %x\n",


Patches currently in stable-queue which might be from 
[email protected] are

queue-3.0/pch_dma-fix-channel-locking.patch
queue-3.0/pch_phub-care-funcsel-register-in-pm.patch
queue-3.0/pch_uart-set-pcie-bus-number-using-probe-parameter.patch
queue-3.0/pch_phub-fix-register-miss-setting-issue.patch
queue-3.0/pch_dma-fix-dma-issue-ch8-ch11.patch
queue-3.0/pch_dma-fix-ctl-register-access-issue.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to