3.0-stable review patch. If anyone has any objections, please let me know.
------------------ From: Tomoya MORINAGA <[email protected]> commit 64d91cfaade2155ad048fe3b65238a052e29dde4 upstream. Currently, ".setup" function is not set. As a result, when detecting our IOH's uart device without pch_uart, kernel panic occurs at the following of pciserial_init_ports(). for (i = 0; i < nr_ports; i++) { if (quirk->setup(priv, board, &serial_port, i)) break; So, this patch adds the ".setup" function. We can use pci_default_setup because our IOH's uart is compatible with 16550. Signed-off-by: Tomoya MORINAGA <[email protected]> Acked-by: Alan Cox <[email protected]> Signed-off-by: Tomoya MORINAGA <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/tty/serial/8250_pci.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -1459,51 +1459,61 @@ static struct pci_serial_quirk pci_seria .vendor = PCI_VENDOR_ID_INTEL, .device = 0x8811, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = PCI_VENDOR_ID_INTEL, .device = 0x8812, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = PCI_VENDOR_ID_INTEL, .device = 0x8813, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = PCI_VENDOR_ID_INTEL, .device = 0x8814, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x8027, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x8028, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x8029, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x800C, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x800D, .init = pci_eg20t_init, + .setup = pci_default_setup, }, { .vendor = 0x10DB, .device = 0x800D, .init = pci_eg20t_init, + .setup = pci_default_setup, }, /* * Cronyx Omega PCI (PLX-chip based) -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
