This is a note to let you know that I've just added the patch titled

    HID: usbhid: add always-poll quirk

to the 3.17-stable tree which can be found at:
    
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     hid-usbhid-add-always-poll-quirk.patch
and it can be found in the queue-3.17 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.


>From 0b750b3baa2d64f1b77aecc10f20deeb28efe60d Mon Sep 17 00:00:00 2001
From: Johan Hovold <[email protected]>
Date: Fri, 5 Sep 2014 18:08:47 +0200
Subject: HID: usbhid: add always-poll quirk

From: Johan Hovold <[email protected]>

commit 0b750b3baa2d64f1b77aecc10f20deeb28efe60d upstream.

Add quirk to make sure that a device is always polled for input events
even if it hasn't been opened.

This is needed for devices that disconnects from the bus unless the
interrupt endpoint has been polled at least once or when not responding
to an input event (e.g. after having shut down X).

Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

---
 drivers/hid/usbhid/hid-core.c |   26 +++++++++++++++++++++++---
 include/linux/hid.h           |    1 +
 2 files changed, 24 insertions(+), 3 deletions(-)

--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -82,7 +82,7 @@ static int hid_start_in(struct hid_devic
        struct usbhid_device *usbhid = hid->driver_data;
 
        spin_lock_irqsave(&usbhid->lock, flags);
-       if (hid->open > 0 &&
+       if ((hid->open > 0 || hid->quirks & HID_QUIRK_ALWAYS_POLL) &&
                        !test_bit(HID_DISCONNECTED, &usbhid->iofl) &&
                        !test_bit(HID_SUSPENDED, &usbhid->iofl) &&
                        !test_and_set_bit(HID_IN_RUNNING, &usbhid->iofl)) {
@@ -292,6 +292,8 @@ static void hid_irq_in(struct urb *urb)
        case 0:                 /* success */
                usbhid_mark_busy(usbhid);
                usbhid->retry_delay = 0;
+               if ((hid->quirks & HID_QUIRK_ALWAYS_POLL) && !hid->open)
+                       break;
                hid_input_report(urb->context, HID_INPUT_REPORT,
                                 urb->transfer_buffer,
                                 urb->actual_length, 1);
@@ -735,8 +737,10 @@ void usbhid_close(struct hid_device *hid
        if (!--hid->open) {
                spin_unlock_irq(&usbhid->lock);
                hid_cancel_delayed_stuff(usbhid);
-               usb_kill_urb(usbhid->urbin);
-               usbhid->intf->needs_remote_wakeup = 0;
+               if (!(hid->quirks & HID_QUIRK_ALWAYS_POLL)) {
+                       usb_kill_urb(usbhid->urbin);
+                       usbhid->intf->needs_remote_wakeup = 0;
+               }
        } else {
                spin_unlock_irq(&usbhid->lock);
        }
@@ -1134,6 +1138,19 @@ static int usbhid_start(struct hid_devic
 
        set_bit(HID_STARTED, &usbhid->iofl);
 
+       if (hid->quirks & HID_QUIRK_ALWAYS_POLL) {
+               ret = usb_autopm_get_interface(usbhid->intf);
+               if (ret)
+                       goto fail;
+               usbhid->intf->needs_remote_wakeup = 1;
+               ret = hid_start_in(hid);
+               if (ret) {
+                       dev_err(&hid->dev,
+                               "failed to start in urb: %d\n", ret);
+               }
+               usb_autopm_put_interface(usbhid->intf);
+       }
+
        /* Some keyboards don't work until their LEDs have been set.
         * Since BIOSes do set the LEDs, it must be safe for any device
         * that supports the keyboard boot protocol.
@@ -1166,6 +1183,9 @@ static void usbhid_stop(struct hid_devic
        if (WARN_ON(!usbhid))
                return;
 
+       if (hid->quirks & HID_QUIRK_ALWAYS_POLL)
+               usbhid->intf->needs_remote_wakeup = 0;
+
        clear_bit(HID_STARTED, &usbhid->iofl);
        spin_lock_irq(&usbhid->lock);   /* Sync with error and led handlers */
        set_bit(HID_DISCONNECTED, &usbhid->iofl);
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -287,6 +287,7 @@ struct hid_item {
 #define HID_QUIRK_HIDINPUT_FORCE               0x00000080
 #define HID_QUIRK_NO_EMPTY_INPUT               0x00000100
 #define HID_QUIRK_NO_INIT_INPUT_REPORTS                0x00000200
+#define HID_QUIRK_ALWAYS_POLL                  0x00000400
 #define HID_QUIRK_SKIP_OUTPUT_REPORTS          0x00010000
 #define HID_QUIRK_SKIP_OUTPUT_REPORT_ID                0x00020000
 #define HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP 0x00040000


Patches currently in stable-queue which might be from [email protected] are

queue-3.17/usb-option-add-haier-ce81b-cdma-modem.patch
queue-3.17/usb-cdc-acm-add-quirk-for-control-line-state-requests.patch
queue-3.17/hid-usbhid-add-always-poll-quirk.patch
queue-3.17/usb-cdc-acm-add-device-id-for-gw-instek-afg-2225.patch
queue-3.17/hid-usbhid-enable-always-poll-quirk-for-elan-touchscreen.patch
queue-3.17/usb-option-add-support-for-telit-le910.patch
queue-3.17/usb-core-add-device-qualifier-quirk.patch
queue-3.17/usb-quirks-enable-device-qualifier-quirk-for-elan-touchscreen.patch
queue-3.17/usb-serial-ftdi_sio-add-awinda-station-and-dongle-products.patch
queue-3.17/usb-serial-cp210x-add-silicon-labs-358x-vid-and-pid.patch
queue-3.17/usb-cdc-acm-only-raise-dtr-on-transitions-from-b0.patch
queue-3.17/usb-serial-ftdi_sio-add-bricked-ftdi-device-pid.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to