This is a note to let you know that I've just added the patch titled
HID: usbhid: enable always-poll quirk for Elan Touchscreen
to the 3.17-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
hid-usbhid-enable-always-poll-quirk-for-elan-touchscreen.patch
and it can be found in the queue-3.17 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <[email protected]> know about it.
>From bfe3c873e978d78b542a5852575dd74f4d1a5838 Mon Sep 17 00:00:00 2001
From: Johan Hovold <[email protected]>
Date: Fri, 5 Sep 2014 18:08:48 +0200
Subject: HID: usbhid: enable always-poll quirk for Elan Touchscreen
From: Johan Hovold <[email protected]>
commit bfe3c873e978d78b542a5852575dd74f4d1a5838 upstream.
Enable the always-poll quirk for Elan Touchscreens found on some recent
Samsung laptops.
Without this quirk the device keeps disconnecting from the bus (and is
re-enumerated) unless opened (and kept open, should an input event
occur).
Note that while the device can be run-time suspended, the autosuspend
timeout must be high enough to allow the device to be polled at least
once before being suspended. Specifically, using autosuspend_delay_ms=0
will still cause the device to disconnect on input events.
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/hid-ids.h | 3 +++
drivers/hid/usbhid/hid-quirks.c | 1 +
2 files changed, 4 insertions(+)
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -296,6 +296,9 @@
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_73F7 0x73f7
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001 0xa001
+#define USB_VENDOR_ID_ELAN 0x04f3
+#define USB_DEVICE_ID_ELAN_TOUCHSCREEN 0x0089
+
#define USB_VENDOR_ID_ELECOM 0x056e
#define USB_DEVICE_ID_ELECOM_BM084 0x0061
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -70,6 +70,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK,
HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ELAN_TOUCHSCREEN,
HID_QUIRK_ALWAYS_POLL },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER,
HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28,
HID_QUIRK_NOGET },
Patches currently in stable-queue which might be from [email protected] are
queue-3.17/usb-option-add-haier-ce81b-cdma-modem.patch
queue-3.17/usb-cdc-acm-add-quirk-for-control-line-state-requests.patch
queue-3.17/hid-usbhid-add-always-poll-quirk.patch
queue-3.17/usb-cdc-acm-add-device-id-for-gw-instek-afg-2225.patch
queue-3.17/hid-usbhid-enable-always-poll-quirk-for-elan-touchscreen.patch
queue-3.17/usb-option-add-support-for-telit-le910.patch
queue-3.17/usb-core-add-device-qualifier-quirk.patch
queue-3.17/usb-quirks-enable-device-qualifier-quirk-for-elan-touchscreen.patch
queue-3.17/usb-serial-ftdi_sio-add-awinda-station-and-dongle-products.patch
queue-3.17/usb-serial-cp210x-add-silicon-labs-358x-vid-and-pid.patch
queue-3.17/usb-cdc-acm-only-raise-dtr-on-transitions-from-b0.patch
queue-3.17/usb-serial-ftdi_sio-add-bricked-ftdi-device-pid.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
