* Felipe Balbi <[email protected]> [141204 07:12]:
> Caused by a copy & paste error. Note that even with
> this bug AM437x SK display still works because GPIO
> mux mode is always enabled. It's still wrong to mux
> somebody else's pin.
>
> Luckily ball D25 (offset 0x238 - gpio5_8) on AM437x
> isn't used for anything.
>
> While at that, also replace a pullup with a pulldown
> as that gpio should be normally low, not high.
>
> Cc: <[email protected]> # v3.17+
> Acked-by: Tomi Valkeinen <[email protected]>
> Signed-off-by: Felipe Balbi <[email protected]>
Applying into omap-for-v3.19/fixes thanks.
Tony
> ---
> arch/arm/boot/dts/am437x-sk-evm.dts | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts
> b/arch/arm/boot/dts/am437x-sk-evm.dts
> index f7f77a7..0eceb8a 100644
> --- a/arch/arm/boot/dts/am437x-sk-evm.dts
> +++ b/arch/arm/boot/dts/am437x-sk-evm.dts
> @@ -320,8 +320,7 @@
>
> lcd_pins: lcd_pins {
> pinctrl-single,pins = <
> - /* GPIO 5_8 to select LCD / HDMI */
> - 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
> + 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /*
> gpcm_ad7.gpio1_7 */
> >;
> };
> };
> --
> 2.1.0.GIT
>
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
