On Wed, Feb 04, 2015 at 05:04:18AM -0800, Greg Kroah-Hartman wrote:
> On Wed, Feb 04, 2015 at 10:35:22AM +0100, Maxime Ripard wrote:
> > Hi Mathias, Greg,
> >
> > On Mon, Jan 19, 2015 at 02:01:12PM +0100, Maxime Ripard wrote:
> > > The commit 973747928514 ("usb: host: xhci-plat: add support for the Armada
> > > 375/38x XHCI controllers") extended the xhci-plat driver to support the
> > > Armada
> > > 375/38x SoCs, mostly by adding a quirk configuring the MBUS window.
> > >
> > > However, that quirk was run before the clock the controllers needs has
> > > been
> > > enabled. This usually worked because the clock was first enabled by the
> > > bootloader, and left as such until the driver is probe, where it tries to
> > > access the MBUS configuration registers before enabling the clock.
> > >
> > > Things get messy when EPROBE_DEFER is involved during the probe, since as
> > > part
> > > of its error path, the driver will rightfully disable the clock. When the
> > > driver will be reprobed, it will retry to access the MBUS registers, but
> > > this
> > > time with the clock disabled, which hangs forever.
> > >
> > > Fix this by running the quirks after the clock has been enabled by the
> > > driver.
> > >
> > > Signed-off-by: Maxime Ripard <[email protected]>
> > > Cc: <[email protected]> # v3.16+
> >
> > Any chance for this to go in 3.19?
>
> For 3.19? It's too late, I'm not sending anything else to Linus as 3.19
> will be out in a few days.Ok. I'll resend it when 3.20-rc1 is out then. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
signature.asc
Description: Digital signature
