From: Amitkumar Karwar <[email protected]> mwifiex driver supports 2x2 chips as well. Hence valid mcs values are 0 to 15. The check for mcs index is corrected in this patch.
For example: if 40MHz is enabled and mcs index is 11, "iw link" command would show "tx bitrate: 108.0 MBit/s" without this patch. Now it shows "tx bitrate: 108.0 MBit/s MCS 11 40Mhz" with the patch. Cc: "3.2.y, 3.3.y, 3.4.y" <[email protected]> Signed-off-by: Amitkumar Karwar <[email protected]> Signed-off-by: Bing Zhao <[email protected]> --- drivers/net/wireless/mwifiex/cfg80211.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 6c57e83..c2a31d1 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -652,9 +652,9 @@ mwifiex_dump_station_info(struct mwifiex_private *priv, /* * Bit 0 in tx_htinfo indicates that current Tx rate is 11n rate. Valid - * MCS index values for us are 0 to 7. + * MCS index values for us are 0 to 15. */ - if ((priv->tx_htinfo & BIT(0)) && (priv->tx_rate < 8)) { + if ((priv->tx_htinfo & BIT(0)) && (priv->tx_rate < 16)) { sinfo->txrate.mcs = priv->tx_rate; sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS; /* 40MHz rate */ -- 1.7.0.2 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
