From: Greg KH <gre...@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bruce Allan <bruce.w.al...@intel.com>
commit 470a54207ccf7045a59df727573bd9d148988582 upstream.
commit 44abd5c12767a8c567dc4e45fd9aec3b13ca85e0 introduced NULL pointer
dereferences when attempting to access the check_reset_block function
pointer on 8257x and 80003es2lan non-copper devices.
This fix should be applied back through 3.4.
Signed-off-by: Bruce Allan <bruce.w.al...@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pie...@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirs...@intel.com>
Acked-by: David S. Miller <da...@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/net/ethernet/intel/e1000e/ethtool.c | 6 ++++--
drivers/net/ethernet/intel/e1000e/mac.c | 2 +-
drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++--
drivers/net/ethernet/intel/e1000e/phy.c | 8 +++++---
4 files changed, 12 insertions(+), 8 deletions(-)
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -258,7 +258,8 @@ static int e1000_set_settings(struct net
* When SoL/IDER sessions are active, autoneg/speed/duplex
* cannot be changed
*/
- if (hw->phy.ops.check_reset_block(hw)) {
+ if (hw->phy.ops.check_reset_block &&
+ hw->phy.ops.check_reset_block(hw)) {
e_err("Cannot change link characteristics when SoL/IDER is "
"active.\n");
return -EINVAL;
@@ -1604,7 +1605,8 @@ static int e1000_loopback_test(struct e1
* PHY loopback cannot be performed if SoL/IDER
* sessions are active
*/
- if (hw->phy.ops.check_reset_block(hw)) {
+ if (hw->phy.ops.check_reset_block &&
+ hw->phy.ops.check_reset_block(hw)) {
e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
*data = 0;
goto out;
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -709,7 +709,7 @@ s32 e1000e_setup_link_generic(struct e10
* In the case of the phy reset being blocked, we already have a link.
* We do not need to set it up again.
*/
- if (hw->phy.ops.check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
return 0;
/*
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6209,7 +6209,7 @@ static int __devinit e1000_probe(struct
adapter->hw.phy.ms_type = e1000_ms_hw_default;
}
- if (hw->phy.ops.check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
e_info("PHY reset is blocked due to SOL/IDER session.\n");
/* Set initial default active device features */
@@ -6376,7 +6376,7 @@ err_register:
if (!(adapter->flags & FLAG_HAS_AMT))
e1000e_release_hw_control(adapter);
err_eeprom:
- if (!hw->phy.ops.check_reset_block(hw))
+ if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw))
e1000_phy_hw_reset(&adapter->hw);
err_hw_init:
kfree(adapter->tx_ring);
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -2121,9 +2121,11 @@ s32 e1000e_phy_hw_reset_generic(struct e
s32 ret_val;
u32 ctrl;
- ret_val = phy->ops.check_reset_block(hw);
- if (ret_val)
- return 0;
+ if (phy->ops.check_reset_block) {
+ ret_val = phy->ops.check_reset_block(hw);
+ if (ret_val)
+ return 0;
+ }
ret_val = phy->ops.acquire(hw);
if (ret_val)
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
